INSTALL THE HOOD
INSTALL THE HOOD
VERTICAL DISCHARGE ONLY:
6.Mount the 8” round adapter/damper (included in a separate box) to the hood using 4 no. 8 x 3/8” sheet metal screws (included).
HJ0041 |
VERTICAL DISCHARGE ONLY:
7.Plug hood power cord into the outlet.
Slide a 8” metal round duct over the adapter/damper. Use metal foil duct tape to seal the joint.
HJ0037 |
FINALIZE THE INSTALLATION
1. Remove protective plastic film covering the lower flue |
only. |
Peel off both corners at the top of the upper flue. |
Position the lower flue rear notches down (the ones with the |
45° angle). |
Gently slide upper flue inside lower flue, louvers end first |
(so that louvers are hidden inside lower flue, as they are not |
needed). |
NOTE |
Both lower and upper flues are included with the hood, but |
for a 10 foot ceiling, discard the provided upper flue and |
use the optional extension flue, part no. 31131 (purchase |
separately). |
2.Carefully slide in place decorative flue base (notches end first) between the shaded part and the exterior wall of the top of the hood.
12
UPPER FLUE
TOP CORNERS
LOUVERS
LOWER FLUE
REAR NOTCH
HO0144 |
LOWER FLUE |
REAR NOTCH |
HO0143 |
