Maintenance

It is very important to carefully maintain your stove, including burning seasoned wood and maintaining a clean stove and chimney system. Have the chimney cleaned before the burning season and as necessary during the season, as creosote deposits may build up rapidly. Moving parts of your stove require no lubrication.

GLASS INSTALLATION/

REPLACEMENT

1)Remove door from unit.

2)To replace the glass remove the 12 screws highlighted in the diagram below.

3)Lift off the glass retainer and carefully re- move glass.

4)Place new glass in the door, make sure that the glass gasketing will properly seal your unit.

5)Position the glass retainer back on. En- sure that it rests on the gasket and not the glass.

6)Secure glass retainer using the 12 screws. Do not wrench down on the glass as this may cause the glass to break.

7)Place door back on unit.

Remove 12 screws.

GLASS MAINTENANCE

Your Hampton stove is supplied with 5 mm Neoceram ceramic glass (Part #940-345) that will withstand the highest heat that your unit will produce. In the event that you break your glass by impact, purchase your replacement from an authorized Hampton dealer only, and follow our step-by-step Glass Installation/Replacement instructions (refer to previous section).

It will be necessary to clean carbon and ﬂy ash off of the glass at times. If carbon and ﬂy ash remain on the glass for an extended period of time, the glass could eventually become etched and cloudy.

1)Allow the stove to cool down completely before cleaning the glass, do not clean the glass when it is hot.

2)Use cleaners speciﬁcally designed for this glass cleaning. Do not use abrasive clean- ers.

3)Ensure the glass is dry before burning your stove.

CREOSOTE

When wood is burned slowly, it produces tar and other organic vapours, which when combined with moisture, form creosote. The creosote va- pours condense in the relatively cool chimney ﬂue of a slow burning ﬁre. As a result, creosote residue accumulates on the ﬂue lining. When ignited, this creosote can result in an extremely hot ﬁre.

Ways to Prevent and Keep Unit

Free of Creosote

1)Burn stove with the draft control wide open for about 10-15 minutes every morning during burning season.

2)Burn stove with draft control wide open for about 10 - 15 minutes every time you apply fresh wood. This allows the wood to achieve the charcoal stage faster and burns up any unburned gas vapours which might otherwise be deposited within the system.

3)Only burn seasoned wood! Avoid burning wet or green wood. Seasoned wood has been dried at least one year.

4)A small hot ﬁre is preferable to a large smouldering one that can deposit creosote within the system.

5)The chimney and chimney connector should be inspected at least once every two months during the heating season to determine if a creosote buildup has occurred.

6)Have chimney system and unit cleaned by competent chimney sweeps twice a year during the ﬁrst year of use and at least once a year thereafter or when a signiﬁcant layer of creosote has accu- mulated (3mm/1/8" or more) it should be removed to reduce the risk of a chimney ﬁre.

WOOD STORAGE

Store wood under cover, such as in a shed, or covered with a tarp, plastic, tar paper, sheets of scrap plywood, etc., as uncovered wood can absorb water from rain or snow, delaying the seasoning process.

WARNING: Things to remember in case of a chimney ﬁre:

1.Close all draft and damper controls.

2.CALL THE FIRE DEPARTMENT.

Glass Retainer

Hampton H200 Cast Freestanding Woodstove

H200 specifications

The Hampton Bay H200 is a standout model in the realm of outdoor heating solutions, providing both comfort and style for outdoor spaces. As homeowners increasingly seek to extend their enjoyment of patios and backyards, the H200 delivers with an impressive range of features, cutting-edge technologies, and thoughtful design characteristics.

One of the key features of the Hampton Bay H200 is its powerful heating capability. Equipped with a high-efficiency burner, it generates a substantial amount of heat, making it suitable for use on chilly evenings. With an adjustable heat setting, users can easily customize the temperature to suit their comfort level and specific outdoor conditions.

The H200 is also designed with energy efficiency in mind. Its innovative burner technology ensures that it utilizes fuel efficiently, allowing for longer usage times without frequent refueling. This not only saves on operational costs but also reduces the environmental impact associated with outdoor heating.

Portability is another prominent characteristic of the H200. It features a lightweight construction with easy-to-move wheels, enabling users to relocate the heater effortlessly. Whether moving it closer to a gathering or storing it away during warmer months, the H200 makes it convenient to adapt to changing outdoor needs.

Durability is crucial in any outdoor appliance, and the Hampton Bay H200 does not disappoint. Constructed from high-quality materials, it is built to withstand the elements, ensuring longevity and reliable performance. The sleek and modern design with a weather-resistant finish not only enhances its durability but also adds an attractive aesthetic to any outdoor setting.

Safety is a top priority for outdoor heating equipment, and the H200 is equipped with several safety features that provide peace of mind. The automatic shut-off function activates if the heater is tipped over, helping to prevent accidents. Additionally, the safety grid protects users from direct contact with the hot surfaces, reducing the risk of burns.

In summary, the Hampton Bay H200 is a formidable option for anyone looking to enhance their outdoor space. With its powerful heating capabilities, energy-efficient burner technology, portability, durability, and robust safety features, it is well-equipped to offer warmth and comfort in any outdoor environment. Its stylish design seamlessly integrates into various outdoor aesthetics, making it a versatile choice for patios, decks, and gardens alike.