Hampton Bay H200 installation manual Safety Label, 290

Page 4

SAFETY LABEL

This is a copy of the label that accompanies each Hampton H200 Freestanding Woodstove. We have printed a copy of the contents here for your review.

NOTE: Hampton units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one.

 

 

290

 

 

LISTED SPACE HEATER, SOLID FUEL TYPE, ALSO DO NOT REMOVE THIS LABEL

SUITABLE FOR MOBILE HOME INSTALLATION

 

290

 

 

 

 

MODEL: HAMPTON CAST FREESTANDING WOOD STOVE - H200

TESTED TO: UL-1482 / ULC-S627-00

REPORT NO:219-S-09-2

INSTALLANDUSEONLYINACCORDANCEWITHTHEMANUFACTURER'SINSTALLATIONANDOPERATINGINSTRUCTIONS. CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION IN YOUR AREA. USE 150 MM (6 IN.) DIAMETER MINIMUM 24 MSG BLACK OR 26 MSG BLUED STEEL CONNECTOR WITH LISTED UL103 HT FACTORY-BUILT CHIMNEY SUITABLE FOR USE WITH SOLID FUELS OR MASONRY CHIMNEY.

SEE LOCAL BUILDING CODE AND MANUFACTURER'S INSTRUCTIONS FOR PRECAUTIONS REQUIRED FOR PASSING A CHIMNEY THROUGH A COMBUSTIBLE WALL OR CEILING. DO NOT PASS CHIMNEY CONNECTOR THROUGH COMBUSTIBLE WALL OR CEILING. DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER APPLIANCE.

SEPT OCT NOV DEC

MINIMUM CLEARANCES TO

COMBUSTIBLE MATERIALS

 

MEASURE

 

 

FLUE

 

 

FROM

HEATER

CENTER-LINE

 

 

RESIDENTIAL INSTALLATION USING

 

 

 

SINGLE WALL CONNECTOR

 

 

SIDEWALL

A 431

mm / 17 in

D 737 mm / 29 in

 

 

BACKWALL

B 381

mm / 15 in

E 435 mm / 17-1/8 in

 

 

CORNER

C 330

mm / 13 in

F 505 mm / 19-7/8 in

 

INSTALLATION USING LISTED DOUBLE WALL

CONNECTOR - MOBILE HOME

SIDEWALL

A 381

mm / 15 in

D 686 mm / 27 in

BACKWALL

B 254

mm / 10 in

E 308 mm / 12-1/8 in

CORNER

C 228

mm / 9 in

F 403 mm / 15-7/8 in

INSTALLATION USING LISTED DOUBLE WALL CONNECTOR - RESIDENTIAL CLOSE CLEARANCE

SIDEWALL

A 381 mm / 15 in

D 686 mm / 27 in

 

BACKWALL

B 254

mm / 10 in

E 308 mm / 12-1/8 in

 

CORNER

C 228

mm / 9 in

F 403 mm / 15-7/8 in

 

INSTALLATION USING LISTED DOUBLE WALL

 

 

CONNECTOR - ALCOVE

 

SIDEWALL

G 381 mm / 15 in

I 686 mm / 27 in

 

BACKWALL

H 330 mm / 13 in

J 384 mm / 15-1/8 in

 

 

 

 

 

 

FLOOR

PROTECTION*

K 457 mm / 18 in

L 150 mm / 6 in

M 150 mm / 6 in

*In Canada, floor protection must extend 18" (457mm) to the front and 8" (200mm) to each side and back of the stove.

APR MAY JUN JUL AUG

MINIMUM ALCOVE CEILING HEIGHT: 1.5 M / 5 FT MAXIMUM ALCOVE DEPTH 1220 MM / 48 IN.

MINIMUM CLEARANCES FOR HORIZONTAL CONNECTOR TO CEILING: 457 MM / 18"

THE SPACE BENEATH THE HEATER MUST NOT BE OBSTRUCTED. OPERATE ONLY WITH FIREBRICKS IN PLACE.

FOR USE WITH SOLID WOOD FUEL ONLY. USE OF OTHER FUELS MAY DAMAGE HEATER AND CREATE A HAZARDOUS CONDITION. DO NOT OBSTRUCT COMBUSTION AIR OPENINGS. OPERATE ONLY WITH FIREBRICKS IN PLACE. OPERATE ONLY WITH DOOR CLOSED - OPEN FEED DOOR TO FEED FIRE ONLY. DO NOT USE GRATE OR ELEVATE FIRE. BUILD WOOD FIRE DIRECTLY ON HEARTH. DO NOT OVERFIRE - IF HEATER OR CHIMNEY CONNECTOR GLOWS YOU ARE OVERFIRING. INSPECT AND CLEAN CHIMNEY AND CONNECTOR FREQUENTLY. UNDER CERTAIN CONDITIONS OF USE CREOSOTE BUILDUP MAY OCCUR RAPIDLY. KEEP FURNISHINGS AND OTHER COMBUSTIBLE MATERIAL AWAY FROM HEATER. REPLACE GLASS ONLY WITH NEOCERAM GLASS. COMBUSTIBLE FLOOR MUST BE PROTECTED BY NON-COMBUSTIBLE MATERIAL EXTENDING BENEATH THE HEATER AND TO THE FRONT AND SIDES AS INDICATED OR TO THE NEAREST PERMITTED COMBUSTIBLE MATERIAL.

OPTIONAL COMPONENT: FAN (846-515), ELECTRICAL RATING: VOLTS 115, 60 HZ, 2 AMPS

DANGER: RISK OF ELECTRIC SHOCK. DISCONNECT POWER BEFORE SERVICING UNIT. DO NOT ROUTE POWER CORD UNDER OR IN FRONT OF APPLIANCE.

COMPONENTS REQUIRED FOR MOBILE HOME INSTALLATION: OUTSIDE AIR KIT AND ONE OF THE FOLLOWING DOUBLE WALL CONNECTOR

IN CANADA: LISTED SECURITY MODEL DP, OR OLIVER MACLEOD PRO-VENT PV DOUBLE WALLED CONNECTOR WITH LISTED CHIMNEY SYSTEM: SECURITY MODEL S2100, ICC EXCEL 2100, SUPER VENT 2100, SUPERPRO 2100, CF SENTINAL.

IN USA: LISTED DOUBLE WALL CONNECTORS SECURITY MODEL DP, SELKIRK MODEL DS, OLIVER MACLEOD PRO VENT PV, SIMPSON DURA VENT MODEL DVL, GSW SUPER PIPE 6, METAL-FAB DOUBLE WALL. CONNECTED TO ONE OF THE FOLLOWING COMPATIBLE CHIMNEY SYSTEMS SECURITY MODEL S2100 OR MODEL ASHT, SELKIRK MODEL SSII, OLIVER MACLEOD PRO JET 3103, SIMPSON DURA PLUS, GSW MODEL SC OR METAL-FAB TEMP/GUARD, AMERI-TECHS, ICC EXCEL 2100, SIMPSON DURA PLUS HTC . USE CHIMNEY COMPONENTS AS SPECIFIED IN INSTALLATION INSTRUCTIONS.

MANUFACTURED BY:

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 VENTURE ST.

DELTA, BC V4G 1H4

MADE IN CANADA

UNITED STATES ENVIRONMENTAL

CERTIFIED TO COMPLY WITH JULY 1990

PROTECTION AGENCY

PARTICULATE EMISSION STANDARDS.

CAUTION

HOT WHILE IN OPERATION DO NOT TOUCH. KEEP CHILDREN,

 

CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSE

 

SKIN BURNS. READ NAMEPLATE AND INSTRUCTIONS.

918-428a

JAN FEB MAR

OF MANUFACTURE

2009 2010

DATE

2008

4

Hampton H200 Cast Freestanding Woodstove

Image 4
Contents Freestanding Woodstove Hampton Fireplace Product Table of Contents Safety Label 290Installation Unit Dimensions with Standard LegsUnit Dimensions with Optional Short Legs Draft Control Lever Handle PRE-INSTALLATION AssemblyRotating Elbow Residential Installation Modular Installation OptionsResidential Installation C Vent Single Wall Minimum Clearance to Combustible MaterialsMinimum Alcove Clearance to Combustible Materials Additional Clearances For Backwall ExitMinimum Clearance to Combustibles Minimum Clearance to Non-CombustiblesFloor Protection Step bSTEP-BY-STEP Chimney Connector Installation Factory Built ChimneyMasonry Chimney Masonry FireplaceCombustible Wall Chimney Connector PASS-THROUGHS Method a 12 304.8 mm Clearance to Combustible Wall MemberRecommended Heights for Woodstove Flue Example bMobile Home Installation Installation Listed Components For Mobile Home InstallationCanadian Installations Optional Short LEG Installation Brick InstallationDoor Removal Optional BLOWER/FAN Installation Back ShieldOptional Side Shelf Installation Underside of Side Shelf ShownOptional ASH Drawer KIT Installation Andiron BricksOperating Instructions Operating InstructionsFAN Operation First FireSafety Guidelines Draft ControlASH Disposal Safety PrecautionsOptional Ash Drawer Operating Guideline Maintenance Handle Replacement Latch Adjustment MethodBe changed after adjustment Front Door GasketTOP Baffle Replacement Parts List H200 Main AssemblyParts List H200 Door Assembly PART# DescriptionH200 ASH Drawer Assembly H200 FAN Assembly 910-157 FAN ThermodiscHampton H200 Cast Freestanding Woodstove Hampton H200 Cast Freestanding Woodstove Warranty ConditionsInstaller Please complete the following information

H200 specifications

The Hampton Bay H200 is a standout model in the realm of outdoor heating solutions, providing both comfort and style for outdoor spaces. As homeowners increasingly seek to extend their enjoyment of patios and backyards, the H200 delivers with an impressive range of features, cutting-edge technologies, and thoughtful design characteristics.

One of the key features of the Hampton Bay H200 is its powerful heating capability. Equipped with a high-efficiency burner, it generates a substantial amount of heat, making it suitable for use on chilly evenings. With an adjustable heat setting, users can easily customize the temperature to suit their comfort level and specific outdoor conditions.

The H200 is also designed with energy efficiency in mind. Its innovative burner technology ensures that it utilizes fuel efficiently, allowing for longer usage times without frequent refueling. This not only saves on operational costs but also reduces the environmental impact associated with outdoor heating.

Portability is another prominent characteristic of the H200. It features a lightweight construction with easy-to-move wheels, enabling users to relocate the heater effortlessly. Whether moving it closer to a gathering or storing it away during warmer months, the H200 makes it convenient to adapt to changing outdoor needs.

Durability is crucial in any outdoor appliance, and the Hampton Bay H200 does not disappoint. Constructed from high-quality materials, it is built to withstand the elements, ensuring longevity and reliable performance. The sleek and modern design with a weather-resistant finish not only enhances its durability but also adds an attractive aesthetic to any outdoor setting.

Safety is a top priority for outdoor heating equipment, and the H200 is equipped with several safety features that provide peace of mind. The automatic shut-off function activates if the heater is tipped over, helping to prevent accidents. Additionally, the safety grid protects users from direct contact with the hot surfaces, reducing the risk of burns.

In summary, the Hampton Bay H200 is a formidable option for anyone looking to enhance their outdoor space. With its powerful heating capabilities, energy-efficient burner technology, portability, durability, and robust safety features, it is well-equipped to offer warmth and comfort in any outdoor environment. Its stylish design seamlessly integrates into various outdoor aesthetics, making it a versatile choice for patios, decks, and gardens alike.