Enviro EG28 DV, EG28-120 owner manual KIT Components

Page 16

Initial Installation

QUALIFIED INSTALLERS ONLY

FREESTANDING DIRECT VENT KIT WITH COUPLER:

KIT COMPONENTS:

Quantity

Description

Quantity

Description

 

 

 

 

1

Horizontal direct vent termination cap

1

Wall Thimble

 

 

 

 

2

Flue collar adapters (only one used)

4

Wire spacers

 

 

 

 

4

T-20 Torx screws

3

Decorative rings

 

 

 

 

1

Ø65⁄8” (17 cm) 90° elbow

1

4 oz tube RTV silicone

 

 

 

 

1

Inside finish trim collar

20

9/16” tech screws

1

5’ (190cm) length of Ø4” (10cm) double walled flex pipe

8

11⁄2” wood screws

 

 

 

 

2

24” (61cm) section of Ø65⁄8” (17cm) straight pipe

1

Vinyl siding deflector

 

 

 

 

Please ensure that all components are supplied with this kit. If components are missing or have been damaged, contact your dealer, distributor, or courier company. Do not attempt the installation if components are missing or damaged.

INSTALLATION INSTRUCTIONS:

1.Decide on a location for the unit that will meet any or all local code requirements. Refer “Planning Your Installation” and “Clearances to Combustibles”.

2.Set the appliance in the desired location. Determine if any wall studs, electrical wiring, or plumbing pipes are in the way of the venting system as it passes through the wall. If obstructions are found in the wall it may be necessary to adjust the location of the appliance.

3.Set the appliance in the desired location. Temporarily place a 24” (61 cm) section with the non- crimped end on the unit

4.Install the 90° elbow onto the vertical pipe on the stove pointing in the direction that the vent will exit

the structure.

5. Project a level line from the center point of the elbow. Using this center point, scribe a 10” (25.4 cm) hole or square on the wall. Cut the hole out on both the interior and exterior wall surface.

6.Frame the hole as shown in Figure 25.

7.Install the wall thimble and secure the thimble to the inner wall surface.

����

8. With the appliance still in place install

 

�������

the 24” (61 cm) horizontal section on the

 

 

 

 

 

 

 

 

 

 

elbow and let this section of pipe protrude

 

 

 

 

 

through the exterior surface. Mark the pipe

 

 

 

 

 

so that when it is cut it will be flush with

 

 

 

 

 

the exterior wall.

 

 

 

 

 

 

 

 

 

 

9. Dismantle the outer pipe sections.

 

 

 

 

 

 

 

 

 

 

Figure 20: Wire Spacer in Place.

 

 

 

 

10. Remove the 4” (10 cm) flue collar from the

 

 

 

 

 

 

 

 

 

unit and remove any loose sealant. Install the new Ø 4” (10 cm) by 5” (12.5

 

 

 

 

cm) flue collar provided in this kit.

 

Figure 19: Wire Spacers.

 

 

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents EG28 DV Safety Precautions GeneralTable of Contents Codes And Approvals This Enviro EG28 DV FireplaceSpecifications EG28 Exterior DimensionsFor Your Safety Read Completely Before Operating Operating InstructionsComponent Sound & Reason Pilot BurningMaintenance and Service Removing the DoorTurn the unit off, allow it to cool down completely Conversion Kit Installation Kit Parts ListWay, and snap into place Must be not visible Removing valve ScrewInitial Installation Qualified Installers onlyCommon Vertical Installation Do not interfere with the structural integrity of the walls Vent Termination Restrictions KIT Components Assembly of Venting Kit Manufacturer Trade Name Nominal Sizes SV4EBR45 Vent restrictor ring End of the pipes and fittings, are Installing Vent Cap with Vinyl Siding Stand-Off Assemble the desired lengths of black pipe Use of Wall Straps Multi-Story Vent Pipe Installation Insulation33a-2002 Test Methods and the Resulting ITS/WH EG28 DV Wiring Diagram Natural Gas Propane Main Orifice Manifold PressureMin. Manifold Pressure Max Supply PressureSecondary Installation Log PlacementLog Placement with Embers Trouble Shooting Problem Possible Cause SolutionParts List Reference Part Description NumberReference Number Part Description Part Number Parts Diagram Chassis EG 28 Gas Tray and Door Assemblies Warranty To the DealerWarranty Warranty Installation Data Sheet

EG28-120, EG28 DV specifications

The Enviro EG28 DV and EG28-120 are cutting-edge devices designed for enhancing environmental monitoring and improving overall efficiency in various applications. These units are part of Enviro's commitment to sustainable innovation, catering to industries such as agriculture, industrial processes, and smart cities.

One of the standout features of the Enviro EG28 DV is its advanced sensor technology. This device is equipped with high-precision sensors that can measure a range of environmental parameters, including air quality, temperature, humidity, and even soil metrics. The ability to gather diverse data points in real-time allows users to make informed decisions, ultimately leading to better resource management and environmental conservation.

The EG28-120 variant takes this a step further with its enhanced connectivity options. It supports various communication protocols, including Wi-Fi, Bluetooth, and cellular networks, ensuring seamless integration into existing systems. This connectivity not only facilitates remote monitoring but also enables data sharing across different platforms, making it easier for stakeholders to access crucial information and collaborate effectively.

Both models boast user-friendly interfaces, complete with intuitive dashboards that simplify data visualization. Users can easily track readings, analyze trends, and generate reports, which is essential for regulatory compliance and performance assessment. The devices are also complemented by mobile applications, allowing for on-the-go monitoring and alerts, thus promoting proactive management of environmental factors.

Durability is another critical aspect of the Enviro EG28 DV and EG28-120. Designed to withstand challenging conditions, these devices feature rugged exteriors and are resistant to dust and water, ensuring reliable performance in various environments. Their low power consumption is an added advantage, making them suitable for long-term deployment without frequent maintenance.

In summary, the Enviro EG28 DV and EG28-120 stand out for their advanced sensor capabilities, versatile connectivity, user-friendly design, and robust durability. These features make them invaluable tools for monitoring environmental conditions, supporting industries in their quest for sustainable practices and efficient resource management. With their innovative technologies, these devices are poised to play a significant role in shaping the future of environmental stewardship.
Top Page Image Contents