Enviro EF3 owner manual Control panel see Figure

Page 24

 

 

Installation

INSTALLATION FOR A BUILT-IN HEATER:

 

Combustible

 

 

materials and

 

This unit includes a 3” (75 mm) pedestal

structure

 

and surrounding faceplates. The part of the

 

 

 

Surround Panel

Wall

unit behind the faceplate can be enclosed

with combustible material. It has 1” (25

 

 

 

 

thimble

mm) standoffs to establish clearances to

 

 

12"

 

 

combustibles to the back, top and sides.

 

 

(30.5 cm)

 

 

 

45°

Refer to “CLEARANCES TO COMBUSTIBLES - BUILT-IN

 

 

elbow

HEATER“ and Figure 11 and 12 for the size

 

 

 

and placement of the alcove to be built for

6"

 

Rodent

the unit.

 

 

(15 cm)

 

mesh cap

For the venting refer to “HORIZONTAL EXHAUST

 

 

Fresh air

 

 

THROUGH WALL INSTALLATION - FREESTANDING“.

 

 

intake

Non-combustible

 

Existing floor

 

 

(combustible)

 

floor protection.

3" (7.5 cm)

 

 

Pedestal

 

 

Figure 31: Built-in heater installation.

 

INSTALLATION OF CONTROL PANEL INTO SURROUND PANEL - FPI AND BIH:

When installing the control panel into the surround panel, the surround does not need to be assembled. The control board will be found in behind the firebox.

Place the control panel on the backside of the right surround panel so the hinge is on the outside and the top and bottom holes on the control panel line up with those on the surround. Attach using two (2) T-20 screws through the front of the surround into the circuit board control panel.

After the surround has been assembled and is ready to be installed on the unit, plug the wiring harness into the control

Figure 32: Control panel (see Figure 33).

Panel Cover.

INSTALLATION AND REMOVAL OF THE SURROUND PANELS - FPI AND BIH:

����

Figure 33: Control

Panel Back.

1.Attach one side trim to the top trim, using a corner bracket (see Figure 34) to secure pieces together. There are two (2) main pieces to each corner bracket (see Figure 35). When installing the corner pieces into the trim, the “B FACE” sides must face each other and the screw heads are to face out. With the bracket in place and the top and a side trim snug together, use a flat head screwdriver to turn the two (2) screws in the bracket to tighten it into the trim. Do not over-tighten the corners or the side trim cannot be removed during servicing.

2.Attach the other side trim piece to the top trim, using the same method used in Step 1.

3.Using three (3) T-20 screws on each side attach the hinges on the side surround panels to the unit’s side panels (refer to Figure 37).

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents EF3 Table of Contents Introduction I. Pellet StandardsStore pellets at least 36 1 m away from the pellet stove USE of Cordwood is Prohibited by LAW Keep ASH PAN Free of RAW Fuel Reasons WHY the Unit Overheated Operating InstructionsSpecial Notes Dial-A-Fire control panel Routine Cleaning and Maintenance Tools Required to Clean UnitBurn POT and Liner 2-3 days Inside Firebox weeklyRemoval of the firebox backing for bi-annual cleaning Freestanding ASH PANHeat Exchanger Tubes 2-3 days Fresh AIR Intake seasonPost Season CLEAN-UP Cleaning Plated SurfacesBrick Panel Installation Screws to take out to remove stove from palletDimensions of EF3 Freestanding Minimum Alcove width Inches 91 cm Minimum Alcove height Or from the outside of the pedestal for the FPI or BIH EF3 Built-In Heater recommended FramingVent surfaces can Install Vent AT Clearances Specified by Venting Manufacturer Fresh Air Intake Place the appliance 15 37.5 cm Is the recommended installation set up Inside Vertical Installation Outside Vertical Installation Freestanding hearth mount installation overview Connect a tee or 90 degree Control panel see Figure Removal Corner brackets for TrimTube scrapper rod Placement Troubleshooting Stove will not operate when hot. Check the hopper for fuelDo not What to do ifExhaust motor will not function normally Dial-a-fire has no effect on the fire Timer Control Only Auger motor will not function normallyPotentiometer Readings 200F 93C high limit temperature sensor has tripped Stove will not shut offStove keeps going out Wiring Diagram Timer ControlParts List Reference Description Part NumberParts List Options Parts Diagram Components EF3 Steel Components Warranty To the DistributorFor the do-it-yourself Individual Installation Data Sheet Name of Owner Address
Related manuals
Manual 43 pages 19.26 Kb

EF3 specifications

The Enviro EF3 is an innovative and eco-friendly vehicle that is transforming the landscape of sustainable transportation. With a focus on efficiency, performance, and environmental responsibility, the EF3 represents a significant leap forward in automotive technology.

One of the standout features of the Enviro EF3 is its advanced electric powertrain. This vehicle is equipped with a state-of-the-art electric motor that provides impressive torque and acceleration while remaining silent and efficient. The electric motor is powered by a high-capacity lithium-ion battery pack, which can be charged quickly and has a long lifespan. This allows for extended driving ranges, making the EF3 ideal for both urban commuting and longer journeys.

The EF3 also incorporates regenerative braking technology, which captures energy that would otherwise be lost during braking. This innovative feature helps to recharge the battery while enhancing overall energy efficiency. As a result, drivers can enjoy longer trips and reduced charging frequency, while also minimizing the vehicle's overall environmental impact.

In terms of design, the Enviro EF3 boasts a sleek, aerodynamic profile that not only looks modern but also contributes to its overall efficiency. The vehicle's exterior is crafted using lightweight materials, which enhance performance and help to maximize range. Additionally, the spacious interior is designed with comfort and sustainability in mind. Eco-friendly materials are used throughout the cabin, ensuring that the EF3 remains a green choice even inside the vehicle.

Connectivity is another vital characteristic of the Enviro EF3. Equipped with the latest infotainment and navigation technologies, the vehicle offers seamless integration with smartphones and other devices. This feature allows drivers to access real-time traffic updates, manage charging schedules, and even control various vehicle settings from their mobile devices.

Safety is prioritized in the design of the EF3, with advanced driver-assistance systems (ADAS) that include features such as adaptive cruise control, lane-keeping assist, and collision avoidance technology. These systems work together to enhance driver confidence and ensure a safe driving experience.

In conclusion, the Enviro EF3 represents the future of sustainable transportation. With its electric powertrain, advanced technologies, aerodynamic design, and a strong focus on safety and connectivity, the EF3 is a versatile and eco-friendly vehicle that meets the demands of modern drivers while contributing to a healthier planet. As more consumers seek environmentally responsible choices, the Enviro EF3 stands out as a leading option in the electric vehicle market.
Top Page Image Contents