Enviro CE2005 owner manual Troubleshooting, Stove will not start, Stove will not operate when hot

Page 12

Troubleshooting

*NOTE: All troubleshooting procedures should be carried out by qualified technicians or installers.

DO NOT:

•Hold the ON / OFF BUTTON; this is a momentary contact switch and can be damaged if held down too long.

•Service the stove with wet hands. The stove is an electrical appliance, which may pose a shock hazard if handled improperly. Only qualified technicians should deal with possible internal electrical failures.

•Do not remove any screws in the firebox without first lubricating them with penetrating oil.

WHAT TO DO IF:

1.The stove will not start.

2.The stove will not operate when hot.

3.The convection blower will not function normally.

4.Control settings (heat level) have no effect on fire.

5.The stove will not shut off.

6.The stove keeps going out.

7.The #2 light is flashing on the heat level indicator light

1. The stove will not start.

üMake sure the stove is plugged in and the wall outlet is supplying power. üPush the ON /OFF button.

üIf the Control Board has been placed in the ON /OFF thermostat mode, then turn the thermostat up to call for heat.

üIf the unit still does not start, contact your local service dealer for service.

2.The stove will not operate when hot.

«Check the hopper for fuel.

«Poor Quality Fuel – Insufficient energy in the fuel to produce enough heat to keep the stove burning or operational.

«The third red LED light in the heat level indicator light will flash if a fire is not detected or if the fire has gone out.

«The unit may require cleaning. Contact your local dealer for service. «Contact your local dealer for additional troubleshooting.

3.The convection blower will not function normally.

«Clean all grill openings at the back and below unit.

«Press the fan button. Does the fan come on? Press again to verify that the blower turns on; if not, contact your local dealer for service.

4. Control settings (Heat Level) have no effect on the fire.

NOTE: If the system light is flashing, the Control Board has complete control of the unit. When the unit’s system light becomes solid, then control of the unit is given back to the operator.

üIf there is no control of the Heat Level button, make sure the thermostat is calling for heat. üCall your local dealer for service.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents EF Thermo Table of Contents Introduction USE of Cordwood is Prohibited by LAWPellet Quality is IMPORTANT, Please Read the Following Store pellets at least 36 1 m away from the pellet stove Rating label is located on the hopper lid Operating Instructions Auger TrimConvection Blower Control ON/OFF ButtonTurning OFF Your Pellet Stove Routine Cleaning and Maintenance ASH PAN and Door GasketsPellet Fuel in ASH PAN ASH RemovalPost Season CLEAN-UP ASH DrawerDo not Place Unburned or RAW Pellet Fuel ASH PANHeat Exchanger and Internal Exhaust Tubes Troubleshooting Stove will not operate when hotControl settings Heat Level have no effect on the fire Stove will not startStove will not shut off Stove keeps going outWarranty To the DistributorFor the do-it-yourself Individual Installation Data Sheet Name of Owner Address

CE2005 specifications

The Enviro CE2005 is an advanced environmental monitoring and management system, designed to address a wide array of ecological challenges. It serves as a versatile tool for agencies, organizations, and individuals who seek to enhance their environmental practices. At its core, the CE2005 leverages cutting-edge technologies to deliver real-time data and analytics that are critical for informed decision-making.

One of the standout features of the Enviro CE2005 is its integrated sensor framework. This system is equipped with a variety of sensors that monitor key environmental parameters such as air quality, water quality, soil moisture, temperature, humidity, and noise levels. These sensors transmit data wirelessly to a central hub, ensuring that users have access to the most current information at their fingertips. This feature is particularly beneficial for environmental scientists and researchers working in the field, as it eliminates the need for manual data collection and provides immediate insights into environmental conditions.

Another key characteristic of the CE2005 is its user-friendly interface. The system is equipped with a sophisticated yet intuitive software platform that allows users to easily navigate through data layers, visualize trends, and generate comprehensive reports. Users can customize dashboards based on specific monitoring needs, making it simple to highlight critical metrics. This capability enhances the overall user experience and enables stakeholders to quickly identify emerging issues and take proactive measures.

In terms of data analytics, the Enviro CE2005 employs advanced algorithms and machine learning techniques to process and interpret environmental data. This allows users to identify patterns, forecast trends, and make predictions about future environmental scenarios. The predictive capabilities of the system are particularly useful for urban planners and environmental policy makers who need to assess the potential impact of proposed developments or changes in land use.

Additionally, the CE2005 is designed with sustainability in mind. It operates on an energy-efficient architecture that minimizes its environmental footprint. The system is compatible with renewable energy sources, making it an eco-friendly choice for monitoring programs in remote or off-grid locations.

Overall, the Enviro CE2005 is a comprehensive environmental monitoring solution that combines innovative technologies with practical features. Its integrated sensor framework, user-friendly interface, advanced data analytics, and commitment to sustainability make it an invaluable asset for anyone dedicated to preserving and enhancing the environment. Whether for research, policy-making, or community awareness, the CE2005 provides the tools necessary to tackle the pressing environmental challenges of our time.
Top Page Image Contents