Enviro CE2005 owner manual Turning OFF Your Pellet Stove

Page 8

Operating Instructions

5.The convection blower (room air blower) will be on, the speed of this blower is controlled by the setting set on the heat output indicator. The convection blower can be turned OFF by depressing the convection blower control button. It is recommended that the convection blower be left on at all times.

6.When unit is operating on LOW the unit can be adjusted for poorer quality fuels. By depressing the Auger Trim button, WHEN THE UNIT IS ON LOW, the ON time the auger pulses can be changed from 2 seconds ON to 4 seconds ON.

AUGER TRIM

2SECONDS “ON”

AUGER TRIM

3SECONDS “ON” Factory Setting

AUGER TRIM

4SECONDS “ON”

These settings can be used if the unit does not keep a fire going on low (poor quality fuel). These settings could also be used if the low setting is too hot or cold for the surrounding area.

7.Set water and/or room thermostats to desired temperature(s).

Figure 4

TURNING OFF YOUR PELLET STOVE:

To turn the unit OFF, simply press the ON / OFF button. All LED lights will go out. This will stop the feed of pellets. The blowers will continue to operate and cool the stove. When cool enough, the stove will shut down.

NOTE: During the 15 minute start-up sequence the stove can not be turned off by turning the water temperature dial down. If the dial is turned down, the stove will run through its complete start-up sequence and shut down after the stove has lit. The unit can be shut-off manually at this time by pressing the ON/OFF button.

SLIDER/DAMPER OPERATION:

This is used to regulate the airflow through the pellet stove.

• On the low heat output settings, push the slider all the way in.

• On the high heat output pull the slider out or until a good fire is achieved. A good fire is in between a fire with lazy black tipped flames and a forced fire (very quick, shorter flames). A good fire is the most efficient and will have a bright and active flame.

• Slider should be set at a hot magnehelic reading of 0.14” W.C. (34 Pa) for firebox vacuum.

���� ���

����

���

Figure 5

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents EF Thermo Table of Contents Introduction USE of Cordwood is Prohibited by LAWPellet Quality is IMPORTANT, Please Read the Following Store pellets at least 36 1 m away from the pellet stove Rating label is located on the hopper lid Operating Instructions Auger TrimConvection Blower Control ON/OFF ButtonTurning OFF Your Pellet Stove Routine Cleaning and Maintenance ASH PAN and Door GasketsPellet Fuel in ASH PAN ASH RemovalPost Season CLEAN-UP ASH DrawerDo not Place Unburned or RAW Pellet Fuel ASH PANHeat Exchanger and Internal Exhaust Tubes Troubleshooting Stove will not operate when hotControl settings Heat Level have no effect on the fire Stove will not startStove will not shut off Stove keeps going outFor the do-it-yourself Individual WarrantyTo the Distributor Installation Data Sheet Name of Owner Address

CE2005 specifications

The Enviro CE2005 is an advanced environmental monitoring and management system, designed to address a wide array of ecological challenges. It serves as a versatile tool for agencies, organizations, and individuals who seek to enhance their environmental practices. At its core, the CE2005 leverages cutting-edge technologies to deliver real-time data and analytics that are critical for informed decision-making.

One of the standout features of the Enviro CE2005 is its integrated sensor framework. This system is equipped with a variety of sensors that monitor key environmental parameters such as air quality, water quality, soil moisture, temperature, humidity, and noise levels. These sensors transmit data wirelessly to a central hub, ensuring that users have access to the most current information at their fingertips. This feature is particularly beneficial for environmental scientists and researchers working in the field, as it eliminates the need for manual data collection and provides immediate insights into environmental conditions.

Another key characteristic of the CE2005 is its user-friendly interface. The system is equipped with a sophisticated yet intuitive software platform that allows users to easily navigate through data layers, visualize trends, and generate comprehensive reports. Users can customize dashboards based on specific monitoring needs, making it simple to highlight critical metrics. This capability enhances the overall user experience and enables stakeholders to quickly identify emerging issues and take proactive measures.

In terms of data analytics, the Enviro CE2005 employs advanced algorithms and machine learning techniques to process and interpret environmental data. This allows users to identify patterns, forecast trends, and make predictions about future environmental scenarios. The predictive capabilities of the system are particularly useful for urban planners and environmental policy makers who need to assess the potential impact of proposed developments or changes in land use.

Additionally, the CE2005 is designed with sustainability in mind. It operates on an energy-efficient architecture that minimizes its environmental footprint. The system is compatible with renewable energy sources, making it an eco-friendly choice for monitoring programs in remote or off-grid locations.

Overall, the Enviro CE2005 is a comprehensive environmental monitoring solution that combines innovative technologies with practical features. Its integrated sensor framework, user-friendly interface, advanced data analytics, and commitment to sustainability make it an invaluable asset for anyone dedicated to preserving and enhancing the environment. Whether for research, policy-making, or community awareness, the CE2005 provides the tools necessary to tackle the pressing environmental challenges of our time.
Top Page Image Contents