Enviro CE2005 owner manual Stove will not shut off, Stove keeps going out

Page 13

Troubleshooting

5. The stove will not shut off.

«If the unit will not shut off, ensure that the thermostat (if equipped) is turned down below the room temperature (thermostat mode in the ON / OFF position).

«If the unit is in the HI/LOW mode the unit will not shut off but will go to an idle setting (LOW). Press the ON/OFF button to turn the unit off.

6. The stove keeps going out.

If the stove goes out and leaves fresh unburned pellets or cigarette-like ashes in the burn pot liner, the fire is going out before the stove shuts off.

üCheck to see that the Slider / Damper is in the correct position.

üTurn the Heat Level up slightly (poor quality pellets will require slightly higher settings). üSet the auger trim till the #1 and #5 lights are illuminated.

If the stove goes out and there are partially burned pellets left in the burn pot liner, the stove has shut down due to a lack of air, exhaust temperature, or power failure.

«Adjust the Slider / Damper.

«Check to see if the stove needs a more complete cleaning. «Did the power go out?

«Turn the Heat Level up slightly (poor quality pellets will require slightly higher settings). «Contact your local Dealer for service.

7. The #2 light is flashing on the heat level indicator light (see #8 in Figure 3).

«The water temperature high limit switch has tripped. Remove right cabinet side and manually reset the high limit switch.

«The low water pressure switch has tripped. Increase the water pressure in the system.

To reset Circuit Board after a trouble code - push the ON/OFF button.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents EF Thermo Table of Contents USE of Cordwood is Prohibited by LAW IntroductionPellet Quality is IMPORTANT, Please Read the Following Store pellets at least 36 1 m away from the pellet stove Rating label is located on the hopper lid Auger Trim Operating InstructionsConvection Blower Control ON/OFF ButtonTurning OFF Your Pellet Stove ASH PAN and Door Gaskets Routine Cleaning and MaintenancePellet Fuel in ASH PAN ASH RemovalASH Drawer Post Season CLEAN-UPDo not Place Unburned or RAW Pellet Fuel ASH PANHeat Exchanger and Internal Exhaust Tubes Stove will not operate when hot TroubleshootingControl settings Heat Level have no effect on the fire Stove will not startStove keeps going out Stove will not shut offTo the Distributor WarrantyFor the do-it-yourself Individual Name of Owner Address Installation Data Sheet

CE2005 specifications

The Enviro CE2005 is an advanced environmental monitoring and management system, designed to address a wide array of ecological challenges. It serves as a versatile tool for agencies, organizations, and individuals who seek to enhance their environmental practices. At its core, the CE2005 leverages cutting-edge technologies to deliver real-time data and analytics that are critical for informed decision-making.

One of the standout features of the Enviro CE2005 is its integrated sensor framework. This system is equipped with a variety of sensors that monitor key environmental parameters such as air quality, water quality, soil moisture, temperature, humidity, and noise levels. These sensors transmit data wirelessly to a central hub, ensuring that users have access to the most current information at their fingertips. This feature is particularly beneficial for environmental scientists and researchers working in the field, as it eliminates the need for manual data collection and provides immediate insights into environmental conditions.

Another key characteristic of the CE2005 is its user-friendly interface. The system is equipped with a sophisticated yet intuitive software platform that allows users to easily navigate through data layers, visualize trends, and generate comprehensive reports. Users can customize dashboards based on specific monitoring needs, making it simple to highlight critical metrics. This capability enhances the overall user experience and enables stakeholders to quickly identify emerging issues and take proactive measures.

In terms of data analytics, the Enviro CE2005 employs advanced algorithms and machine learning techniques to process and interpret environmental data. This allows users to identify patterns, forecast trends, and make predictions about future environmental scenarios. The predictive capabilities of the system are particularly useful for urban planners and environmental policy makers who need to assess the potential impact of proposed developments or changes in land use.

Additionally, the CE2005 is designed with sustainability in mind. It operates on an energy-efficient architecture that minimizes its environmental footprint. The system is compatible with renewable energy sources, making it an eco-friendly choice for monitoring programs in remote or off-grid locations.

Overall, the Enviro CE2005 is a comprehensive environmental monitoring solution that combines innovative technologies with practical features. Its integrated sensor framework, user-friendly interface, advanced data analytics, and commitment to sustainability make it an invaluable asset for anyone dedicated to preserving and enhancing the environment. Whether for research, policy-making, or community awareness, the CE2005 provides the tools necessary to tackle the pressing environmental challenges of our time.
Top Page Image Contents