Installation8

When installing and operating your Harman Accentra Pellet Stove, respect basic safety standards. Read these instructions carefully before you attempt to install or operate the Accentra. Failure to do so may re- sult in damage to property or personal injury and may void the product warranty.

Consult with your local building code agency and insurance representative before you begin your instal- lation to ensure compliance with local codes, including the need for permits and follow-up inspections.

Several issues must be addressed when select- ing a suitable location for your Accentra Pellet Stove. Observing required clearances to combustible materi- als, the proximity to a safe chimney or venting system, and the accessibility of electrical supply must all be con- sidered. In addition, selecting a location that takes ad- vantage of the building's natural air flow is also desir- able to maximize the heating effectiveness of the heater. In many cases, this is a central location within the build- ing.

Adequate combustion and ventilation air must be provided. The Accentra pellet stove is capable of being installed with a 100% outside air combustion system. See Page 14 about venting.

Place the stove on a noncombustible floor surface. If the floor surface is made of a combustible material, (such as carpet, vinyl or wood), a noncombustible ma- terial must be installed between the bottom of the unit and the floor. This can be a minimum of a 20 gauge sheetmetal plate, ceramic tile with grouted joints, a UL listed stove board, or a Harman Cast Iron floor protec- tor1. The Harman Cast Iron Floor Protector is equal to the minimum dimensions, which are 241/16 x 285/81. This allows for a 2" extension on each side of the unit and a 6" extensionto the front of the ashopening (33/8"2 if mea- sured from the base plate front edge.) The rear edge of the floor protection can be flush with the cast base plate rear edge.

Place the stove away from combustible walls at least as far as shown in figures 10, 11, 12, & 13

Note that the clearances shown are minimum for safety but do not leave much room for access when cleaning or service is needed.

AFTER THE INSTALLATION IS COMPLETED

Before the first fire is lit, check and record the high and low draft reading numbers on page 12. Make adjustments to the low draft at this time, if necessary.

6.25"	5"min.3
	5"min3
	6.25"
	Fig.10
	2.25"
	12"

		Fig.11
		0"
"*	2"	2"
16	2"	2"
24 1/
	FLOOR	6"2
	PROTECTOR1	Fig.12
	285/ "*
		8

(*Harman Cast Iron Floor Protector size)

This is the minimum size Harman
recommends for the alcove with a 60" ceiling.
14.75"	14.75"
24"
2.25"
	54"	Fig. 13
	54"

CAUTION

The stove is hot while in operation.

Keep children, clothing and furniture away.

Contact may cause skin burns.

1.Check your local codes to see if protection is required under the flue pipe.

2.This measurement equals 6" from inside edge of ash door opening.

3.5" pipe clearance to wall in a corner installation.

2 specifications

Harman Stove Company 2 has earned a reputation as a leader in the hearth products industry, particularly known for its innovative approach to pellet stoves and inserts. Established with a commitment to quality and efficiency, Harman focuses on creating products that elevate comfort while being environmentally sustainable.

One of the standout features of Harman Stove Company 2 is its advanced heating technology. Their pellet stoves utilize a unique feed system that ensures consistent fuel delivery, which translates to reliable, even heat output. The integrated Smart Control technology allows users to easily adjust settings remotely, providing the convenience of controlling the stove from their smartphones.

Notably, Harman stoves come equipped with the exclusive Heat Management System (HMS), which helps to distribute warmth throughout the home effectively while optimizing fuel consumption. This system includes adjustable air intake and exhaust options that enhance efficiency, ensuring that less fuel is wasted and more heat is produced.

Durability is another hallmark of Harman's products. Each stove is constructed with high-quality materials, including rugged cast iron and heavy-gauge steel, designed to withstand the test of time while providing excellent heat retention. The company takes pride in its craftsmanship, offering stoves that not only perform exceptionally well but also boast a stylish appearance.

In terms of efficiency, Harman Stove Company 2 focuses on creating products with high efficiency ratings and low emissions. Many of its models are certified by the Environmental Protection Agency (EPA), showcasing their commitment to reducing the environmental impact. Harman's engineering innovations minimize particulate emissions, ensuring that customers can enjoy the warmth of their stove while being environmentally conscious.

Safety is also paramount; Harman stoves come with features such as automatic shutoff systems and heat-resistant glass, providing peace of mind for users. The company's dedication to safety is evident in its rigorous testing processes that ensure every product meets high safety standards.

Overall, Harman Stove Company 2 has successfully combined advanced technology, durable construction, and a focus on environmental stewardship to produce a line of heating solutions that cater to modern consumer needs. Offering reliability, efficiency, and style, Harman continues to be a trusted name in the industry, providing warmth and comfort in homes across the nation.