Venting18, With outside air installed | Harman Stove Company 2

Venting18

Requirements for Terminating the Venting WARNING: Venting terminals must not be re-

cessed into a wall or siding.

NOTE: Only PL vent pipe wall pass-throughs and fire stops should be used when venting through combustible materials.

NOTE: Always take into consideration the ef- fect the prevailing wind direction or other wind cur- rents will cause with flyash and /or smoke when plac- ing the termination.

In addition, the following must be observed: A. The clearance above grade must be a mini-

mum of 18".1

B. The clearance to a window or door that may be opened must be a minimum of 48" to the side and 48" below the window/door, and 12" above the window/door. 1

( with outside air installed, 18” )

C. A 12" clearance to a permanently closed window is recommended to prevent condensation on the window.

D. The vertical clearance to a ventilated soffit located above the terminal within a horizontal dis- tance of 2 feet (60 cm) from the center-line of the terminal must be a minimum of 18".

E. The clearance to an unventilated soffit must be a minimum of 12".

F. The clearance to an outside corner is 11" from center of pipe.

G. The clearance to an inside corner is 12".

H.A vent must not be installed within 3 feet (90 cm) above a gas meter/regulator assembly when measured from the horizontal center-line of the regu- lator.1

I. The clearance to service regulator vent outlet must be a minimum of 6 feet.1

J. The clearance to a non-mechanical air sup-

ply inlet to the building or the combustion air inlet to any other appliance must be a minimum of 48”.1

K. The clearance to a mechanical air supply inlet must be a minimum of 10 feet.1

(with outside air installed, 6 feet )

L. The clearance above a paved sidewalk or a paved driveway located on public property must be a minimum of 7 feet.1,2

M. The clearance under a veranda, porch, deck or balcony must be a minimum of 12 inches.1,3

NOTE: The clearance to vegetation and other exterior combustibles such as mulch is 36” as mea- sured from the center of the outlet or cap. This 36”

radius continues to grade or a minimum of 7 feet below the outlet.

1Certain Canadian and or Local codes or regu- lations may require different clearances.

2A vent shall not terminate directly above a side- walk or paved driveway which is located between two single family dwellings and serves both dwell- ings.

3Only permitted if veranda, porch, deck, or bal- cony is fully open on a minimum of 2 sides beneath the floor.

NOTE: Where passage through a wall, or partition of combustible construction is desired, the installation shall conformto CAN/CSA-B365. (if in Canada)

I ns ide

Corner

Det ail

Fixed
Closed	Openable	Fixed
		Closed
Openable

= Vent terminal

A = Air supply inlet

= Area where terminal is not permitted

2 specifications

Harman Stove Company 2 has earned a reputation as a leader in the hearth products industry, particularly known for its innovative approach to pellet stoves and inserts. Established with a commitment to quality and efficiency, Harman focuses on creating products that elevate comfort while being environmentally sustainable.

One of the standout features of Harman Stove Company 2 is its advanced heating technology. Their pellet stoves utilize a unique feed system that ensures consistent fuel delivery, which translates to reliable, even heat output. The integrated Smart Control technology allows users to easily adjust settings remotely, providing the convenience of controlling the stove from their smartphones.

Notably, Harman stoves come equipped with the exclusive Heat Management System (HMS), which helps to distribute warmth throughout the home effectively while optimizing fuel consumption. This system includes adjustable air intake and exhaust options that enhance efficiency, ensuring that less fuel is wasted and more heat is produced.

Durability is another hallmark of Harman's products. Each stove is constructed with high-quality materials, including rugged cast iron and heavy-gauge steel, designed to withstand the test of time while providing excellent heat retention. The company takes pride in its craftsmanship, offering stoves that not only perform exceptionally well but also boast a stylish appearance.

In terms of efficiency, Harman Stove Company 2 focuses on creating products with high efficiency ratings and low emissions. Many of its models are certified by the Environmental Protection Agency (EPA), showcasing their commitment to reducing the environmental impact. Harman's engineering innovations minimize particulate emissions, ensuring that customers can enjoy the warmth of their stove while being environmentally conscious.

Safety is also paramount; Harman stoves come with features such as automatic shutoff systems and heat-resistant glass, providing peace of mind for users. The company's dedication to safety is evident in its rigorous testing processes that ensure every product meets high safety standards.

Overall, Harman Stove Company 2 has successfully combined advanced technology, durable construction, and a focus on environmental stewardship to produce a line of heating solutions that cater to modern consumer needs. Offering reliability, efficiency, and style, Harman continues to be a trusted name in the industry, providing warmth and comfort in homes across the nation.