Carrier 13 50XP manual Catalog No 50XP-4PD Replaces 50XP-3PD

Page 24

Guide specifications (cont)

L.Grille

1.Louvered Grille:

Louvered grille shall be standard on all units.

M.Special Features Available

1.Coil Options:

Shall include factory-installed optional tin-plated indoor, copper/copper and vinyl-coated refriger- ant coils.

2.Economizer:

a.Economizer controls capable of providing free cooling using outside air.

b.Equipped with low leakage dampers not to ex- ceed 3% leakage, at 1.0 in. wg pressure differen- tial.

c.Spring return motor shuts off outdoor damper on power failure.

3.Flat Roof Curb:

Curbs shall have seal strip and a wood nailer for flashing and shall be installed per manufacturer’s instructions.

4.Manual Outdoor Air Damper:

Package shall consist of damper, birdscreen, and rainhood which can be preset to admit outdoor air for year-round ventilation.

5.Thermostat:

To provide for one-stage heating and cooling in ad- dition manual or automatic changeover and indoor fan control.

6.Low Ambient Package:

Shall consist of a solid-state control and condenser coil temperature sensor for controlling condenser- fan motor operation, which shall allow unit to oper- ate down to 0° F outdoor ambient temperature.

7.Filter Rack Kit:

Shall provide filter mounting for downflow or hori- zontal applications.

8.Square-To-Round Duct Transitions (024-048): Shall have the ability to convert the supply and re- turn openings from rectangular to round. (024-048 only)

9.Compressor Protection (Time Guard® II Kit) Solid-state control shall protect compressor by pre- venting “short cycling.”

10.Crankcase Heater:

Shall provide anti-floodback protection for low- load cooling applications.

11.Electric heaters:

a.Electric heater shall be available as a field- installed option.

b.Heater elements shall be open wire type, ade- quately supported and insulated with ceramic bushings.

c.Electric heater packages must provide single point power connection capability.

12.Compressor Hard start kit:

Shall be available to give a boost to the compressor motor at each start-up. (Single Phase only).

Copyright 2005 Carrier Corp. • 7310 W. Morris St. • Indianapolis, IN 46231

Printed in U.S.A.

edition date: 10/05

 

 

 

 

 

 

 

Manufacturer reserves the right to change, at any time, specifications or designs without notice and obligations

Catalog No: 50XP-4PD

Replaces: 50XP-3PD

Image 24
Contents Product Data Table of contents Model number nomenclature ARI* capacitiesUnit Nominal Standard NET Cooling Sound EER@APhysical data Options and accessories ODS Catalog Nominal Capacity Used with Sizes Ordering noUnit AirflowEconomizer Filter Rack Manual Outside AIR Damper Base unit dimensions-50XP024-036 Electrical Unit Weight Unit HeightCharacteristics In. mmBase unit dimensions-50XP042-060 Accessory dimensions Unit Size ODS Catalog Number50XP Corner weights In Pounds Selection ProcedureSmall Base Large Base 50XP024 Cooling Performance Table SHC50XP030 Cooling Performance Table 50XP036 Cooling Performance Table 1100/0.061400/0.08 Outdoor Air Entering Condenser50XP048 Cooling Performance Table 1260/0.06 1400/0.06 1600/0.08 Outdoor Air Entering50XP060 Cooling Performance Table 1500/0.004 1750/0.007 2000/0.01 Outdoor Air EnteringPerformance data CFM Adjust LO PIN NOM PIN HI PIN Unit Size024 Unit Standard CFM SizeTypical piping and wiring Application data Electrical data 187 253 13.5FLA Typical wiring schematic- 208/230-1-60 Typical wiring schematic- 208/230-3-60 Controls Operating sequenceGuide specifications Packaged Electric Cooling Units Constant Volume ApplicationCatalog No 50XP-4PD Replaces 50XP-3PD

13 50XP specifications

The Carrier 13 50XP is a central air conditioning unit known for its reliability, efficiency, and advanced technology features. Designed for residential and light commercial applications, this system stands out in the HVAC market for its performance and durability.

One of the primary features of the Carrier 13 50XP is its high energy efficiency. The unit has a SEER (Seasonal Energy Efficiency Ratio) rating of up to 14, making it a cost-effective option for homeowners looking to reduce energy consumption. This efficiency is crucial as it translates to lower utility bills and a reduced carbon footprint.

The Carrier 13 50XP incorporates the innovative WeatherShield cabinet, which enhances durability against the elements. This robust housing protects internal components from harsh weather conditions, ensuring reliable performance over time. The all-aluminum coil design further enhances its resistance to corrosion while maximizing heat exchange efficiency.

In terms of comfort control, the system is compatible with various thermostat options, including smart thermostats, providing homeowners with the convenience of monitoring and adjusting temperatures from anywhere. The multi-speed blower provides an added layer of comfort by optimizing humidity control and air distribution throughout the space.

The unit is equipped with sound-dampening technology, which minimizes operational noise, making it a quiet choice for residential areas. This feature is essential for maintaining a peaceful home environment, particularly in bedrooms or family rooms.

Additionally, the Carrier 13 50XP utilizes R-410A refrigerant, which is designed to be environmentally friendly. R-410A is less harmful to the ozone layer than older refrigerants, complying with current environmental regulations and contributing to sustainable living practices.

The installation process for the Carrier 13 50XP is straightforward, thanks to its compact design and flexible configurations. The unit is also backed by Carrier's reliable warranty options, providing peace of mind for consumers.

In summary, the Carrier 13 50XP is a well-rounded air conditioning solution that combines energy efficiency, durability, and advanced technology features. Its commitment to environmental responsibility and user comfort makes it a valuable addition to any home or small commercial setting, ensuring reliable cooling performance for years to come.