CFM UVHB10 warranty General Information, Table Of Contents

Page 2

PYROMASTER® UVHB10 Vent-Free Heaters

General Information

This gas room heater should be installed by a qualified installer in accordance with local building codes and with current National Fuel Gas Code. ANSI Z223.1.

This heater should not be installed in a confined space unless provisions are made for adequate combustion and ventilation air.

The National Fuel Gas Code defines a confined space as "a space whose volume is less than 50 cubic feet per 1000 BTU per hour (4.83 per kw) of the aggregate input rating of all appliances installed in that space" and unconfined space as "space."

If the area in which the heater may be operated is smaller than that defined as an "unconfined space," provide adequate combustion and ventilation air by one of the methods described in the National Fuel Code, ANSI Z223.1, 1992, Section 5.3.

FOR SAFE INSTALLATION AND OPERATION OF YOUR PYROMASTER VENT-FREE ROOM HEATER PLEASE NOTE THE FOLLOWING:

1.This heater gives off high temperatures and should be located out of high traffic areas and away from furniture and draperies.

2.This appliance is for supplemental heating only. It should not be used as the primary heat source for a dwelling.

3.Children and adults should be alerted to the hazards of the high surface temperatures of this heater and should stay away to avoid burns or ignition of clothing.

4.Children should be carefully supervised when they are in the same room as your heater.

5.Under no circumstances should this heater be modified. Parts removed for service should be replaced prior to operating this heater again.

6.Installation and any repairs to this heater should be carried out by a qualified service person. A professional service person should be contacted to inspect this heater annually. Make it a practice to have all of your gas heaters checked annually. More frequent cleaning may be required due to excess lint and dust from carpeting, bedding material, etc.

7.Control compartments, burners and air passages in this heater should be kept clean and free of dust and lint. Make sure that the gas valve and pilot light are turned off before you attempt to clean this unit.

8.WARNING: Failure to keep the primary air opening(s) of the burner(s) clean may result in sooting and property damage.

9.Under no circumstances should any solid fuels (wood, coal, paper or cardboard, etc.) be used in this heater.

10.Keep the area around your heater clear of combustible materials, gasoline and other flammable vapor and liquids. This heater should not be used as a drying rack for clothing, nor should Christmas stockings or decorations be hung in the area of it.

11.Under no circumstance should this Heater be installed in a chase or used with any other mantel than the approved FPS1212NC, FPS1214 or FPS1213N mantels.

12.Do not install heater in bedroom or bathroom.

13.Avoid propane tank dropping below 25% full. This will help prevent soot from occurring.

Safety Devices

Adequate combustion and ventilation air must be pro- vided. The flow of combustion and ventilation air MUST NOT be obstructed.

Provide adequate clearances around the air opening into the combustion chamber; and adequate accessibility clearance for servicing and proper operation. NEVER obstruct the front opening of the heater or cover the top and bottom louvres.

These heaters are equipped with a pilot system featuring an Oxygen Depletion Sensor (O.D.S.) shut-off device. All unvented heaters are required to have this system. The O.D.S. pilot will shut down the heater when there is not enough fresh air available.

Report any parts damaged in shipment to your dealer.

Proposition 65 Warning: Fuels used in gas, woodburning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

Table Of Contents

General Information . . . . . . . . . . . . . . . . . 2

Specifications . . . . . . . . . . . . . . . . . . . . . . 3

Installation . . . . . . . . . . . . . . . . . . . . . . . . . 5

Operation . . . . . . . . . . . . . . . . . . . . . . . . . 7

Maintenance . . . . . . . . . . . . . . . . . . . . . . . 9

Troubleshooting . . . . . . . . . . . . . . . . . . . 10

Replacement Parts . . . . . . . . . . . . . . . . . 11

Accessories . . . . . . . . . . . . . . . . . . . . . . . 12

2

20004232

Page 1 Page 3
Image 2
Page 1 Page 3
Contents UVHB10 Table Of Contents General InformationUVHB10 Series Gas Appliance Corner Cabinet Minimum Clearances Gas SpecificationsDescription Gas Supply PressuresOptional FK24 Fan Hook-Up InstallationPreparing the UVHB10 Fan Operation Installing Brass TrimFinal Assembly UVHB10 Logset Run Gas Line from Its Source to the HeaterOperation Flame AdjustmentWhen Used as a Heating Appliance First FiringTo Turn Off Gas To Heater What to do if YOU Smell GASHandle only When Cool MaintenanceCleaning the Standing Pilot Control System Troubleshooting Symptom Possible Causes Corrective ActionReplacement Parts List UVHB10 UVHB10Accessories Limited 2/20 Year Warranty

UVHB10 specifications

The CFM UVHB10 is a cutting-edge vehicle that represents a significant advancement in the world of electric mobility and urban transport solutions. Designed for efficiency and versatility, the UVHB10 is an all-electric, low-floor bus that serves as a strong response to the rising demand for green public transportation options.

One of the standout features of the CFM UVHB10 is its impressive battery technology. Equipped with a high-capacity lithium-ion battery, this bus can operate for extended periods on a single charge, thus ensuring that public transit systems can maintain reliable service without frequent downtime for recharging. The energy management system is optimized to provide maximum efficiency, allowing the bus to cover significant distances while minimizing energy consumption.

In terms of capacity, the CFM UVHB10 can accommodate a large number of passengers, making it an ideal solution for urban areas experiencing high ridership levels. Its spacious interior, coupled with wide entryways, ensures quick boarding and alighting, which is crucial during peak travel times. The low-floor design not only aids accessibility for passengers with limited mobility but also enhances passenger comfort overall.

The UVHB10 boasts advanced safety technologies that are increasingly becoming essential in modern public transport vehicles. It comes equipped with an integrated collision avoidance system, advanced braking features, and real-time monitoring capabilities. These technologies work together to reduce the risk of accidents and enhance passenger safety.

Furthermore, the bus incorporates smart connectivity features that allow for real-time tracking of routes and customer service enhancements. Passengers can receive updates through mobile applications about bus locations, estimated arrival times, and service disruptions.

The exterior design of the CFM UVHB10 is both functional and modern, featuring a sleek profile that minimizes air resistance, further contributing to energy efficiency. The vehicle is also designed with sustainable materials, aligning with the eco-friendly ethos of electric transportation.

Overall, the CFM UVHB10 represents a forward-thinking approach to public transit. By combining innovative technologies with practical features for passengers and operators alike, it positions itself as a leading choice in the shift towards environmentally sustainable urban mobility solutions. With its powerful performance, extensive range, and commitment to safety, the UVHB10 is set to change the dynamics of public transportation in cities around the world.
Top Page Image Contents