CFM UVHB10 warranty Maintenance, Cleaning the Standing Pilot Control System, Handle only When Cool

Page 9

PYROMASTER® UVHB10 Vent-Free Heaters

Maintenance

Keep the control compartment, logs and burner area surrounding the logs clean by vacuuming or brushing at least twice a year. THE LOGS CAN GET VERY HOT

—HANDLE ONLY WHEN COOL.

Always turn off gas to the pilot before cleaning. For relighting, refer to lighting instructions located on the front cover plate.

Never obstruct the flow of combustion and ventilation air. Keep the front of the heater clear of all obstacles and materials.

Leave at least 36" clearance from front of heater to combustibles.

Cleaning the Standing Pilot

Control System

The burner and control system consists of:

• main burner

• pilot burner

• gas orifice

• thermopile

• combination millivolt gas valve

Most of these components may require only an occa- sional checkup and cleaning and some may require adjustment. If repair is necessary, it should be per- formed by a qualified technician.

In order to properly clean the burner and pilot assembly, turn off the gas to the unit, remove the logs exposing the burner and pilot assembly. Clean all foreign materi- als from the top of the burner. Check to make sure that burner parts are clean. Visually inspect pilot. Brush or blow away any dust or lint accumulation If pilot orifice is plugged, disassembly may be required to remove any foreign material from the orifice or tubing.

To obtain proper operation, it is imperative that the pilot and burner's flame characteristics are steady, not lifting or floating.

Typically, the top 1/8" of the thermopile should be engulfed in the pilot flame. (Fig. 10, Page 7)

The air shutter is set at the factory, no adjustment should be necessary.

20004232

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents UVHB10 General Information Table Of ContentsUVHB10 Series Gas Appliance Corner Cabinet Description Gas SpecificationsMinimum Clearances Gas Supply PressuresInstallation Preparing the UVHB10Optional FK24 Fan Hook-Up Final Assembly Installing Brass TrimFan Operation UVHB10 Logset Run Gas Line from Its Source to the HeaterWhen Used as a Heating Appliance Flame AdjustmentOperation First FiringWhat to do if YOU Smell GAS To Turn Off Gas To HeaterMaintenance Cleaning the Standing Pilot Control SystemHandle only When Cool Symptom Possible Causes Corrective Action TroubleshootingUVHB10 Replacement Parts List UVHB10Accessories Limited 2/20 Year Warranty

UVHB10 specifications

The CFM UVHB10 is a cutting-edge vehicle that represents a significant advancement in the world of electric mobility and urban transport solutions. Designed for efficiency and versatility, the UVHB10 is an all-electric, low-floor bus that serves as a strong response to the rising demand for green public transportation options.

One of the standout features of the CFM UVHB10 is its impressive battery technology. Equipped with a high-capacity lithium-ion battery, this bus can operate for extended periods on a single charge, thus ensuring that public transit systems can maintain reliable service without frequent downtime for recharging. The energy management system is optimized to provide maximum efficiency, allowing the bus to cover significant distances while minimizing energy consumption.

In terms of capacity, the CFM UVHB10 can accommodate a large number of passengers, making it an ideal solution for urban areas experiencing high ridership levels. Its spacious interior, coupled with wide entryways, ensures quick boarding and alighting, which is crucial during peak travel times. The low-floor design not only aids accessibility for passengers with limited mobility but also enhances passenger comfort overall.

The UVHB10 boasts advanced safety technologies that are increasingly becoming essential in modern public transport vehicles. It comes equipped with an integrated collision avoidance system, advanced braking features, and real-time monitoring capabilities. These technologies work together to reduce the risk of accidents and enhance passenger safety.

Furthermore, the bus incorporates smart connectivity features that allow for real-time tracking of routes and customer service enhancements. Passengers can receive updates through mobile applications about bus locations, estimated arrival times, and service disruptions.

The exterior design of the CFM UVHB10 is both functional and modern, featuring a sleek profile that minimizes air resistance, further contributing to energy efficiency. The vehicle is also designed with sustainable materials, aligning with the eco-friendly ethos of electric transportation.

Overall, the CFM UVHB10 represents a forward-thinking approach to public transit. By combining innovative technologies with practical features for passengers and operators alike, it positions itself as a leading choice in the shift towards environmentally sustainable urban mobility solutions. With its powerful performance, extensive range, and commitment to safety, the UVHB10 is set to change the dynamics of public transportation in cities around the world.
Top Page Image Contents