Singer 127-3 & 128-3 instruction manual Binder -- Binding

Page 19

127-3 & 128-3

BINDER -- Binding

Remove the presser foot and attach the binder in its place. Pass the binding through the scroll of the binder and draw it back under the needle. Place the edge of the goods to be bound between the scrolls of the binder and draw it under the needle. Lower the presser bar and sew as usual. To make French folds proceed as directed for binding except that the fold is stitched on to the face of the material instead of on the edge (see Fig. 24). After loosening the binder set screw and adjusting the binder the line of stitching can he brought, nearer the centre, this being more effective when making French folds.

Table of Contents

FIG. 24.

Previous Page Next Page

19

Image 19

Contents With Vibrating Shuttle 127-3Hints Table of ContentsInstructions for Using the Attachments Instructions for Operating the MachinesTo ALL Whom IT MAY Concern Main PartsFront View of the Machine Removing the Shuttle Machine Threaded for To Wind the BobbinTo Thread the Shuttle To Set the Needle To Replace the ShuttleThreading the Needle To Thread the NeedleRemove the Work To Prepare for SewingPerfect Stitch TensionsTo Sew Flannel or Bias Seams To Turn a CornerTo Regulate the Length of Stitch To Regulate the Pressure on the MaterialBreaking of Bobbin Thread BeltMachine Working Heavily Breaking of Needle Thread. If the needle thread breaksOiling Points AT the Front of the Machine To Oil the MachineOiling Points in Base of Machine Hemming and Sewing on Lace Foot Hemmer -- HemmingFoot Hemmer -- Felling 127-3 Binder -- Binding Tucker On next RufflerTo Attach the Ruffler to the Machine 127-3 Piping a Ruffle To Adjust the Ruffler for Plaiting To Oil the Ruffler To Adjust the Ruffler for Group Plaiting and GatheringSizes of Needles Classes of Work