Singer 127-3 & 128-3 instruction manual Main Parts, To ALL Whom IT MAY Concern

Page 3

127-3 & 128-3

Main Parts

TO ALL WHOM IT MAY CONCERN:

The improper placing or renewal of the TradeMark "SINGER" or any other of the Trade Marks of The Singer Manufacturing Company (all of which are duly Registered Trade Marks) on any machine that has been repaired, rebuilt, reconditioned, or altered in any way whatsoever outside a SINGER factory or an authorized SINGER agency is forbidden.

Table of Contents

Previous Page Next Page

Image 3

Contents With Vibrating Shuttle 127-3Hints Table of ContentsInstructions for Using the Attachments Instructions for Operating the MachinesTo ALL Whom IT MAY Concern Main PartsFront View of the Machine Removing the Shuttle Machine Threaded for To Wind the BobbinTo Thread the Shuttle To Set the Needle To Replace the ShuttleThreading the Needle To Thread the NeedleRemove the Work To Prepare for SewingPerfect Stitch TensionsTo Sew Flannel or Bias Seams To Turn a CornerTo Regulate the Length of Stitch To Regulate the Pressure on the MaterialBreaking of Bobbin Thread BeltMachine Working Heavily Breaking of Needle Thread. If the needle thread breaksOiling Points AT the Front of the Machine To Oil the MachineOiling Points in Base of Machine Hemming and Sewing on Lace Foot Hemmer -- HemmingFoot Hemmer -- Felling 127-3 Binder -- Binding Tucker On next RufflerTo Attach the Ruffler to the Machine 127-3 Piping a Ruffle To Adjust the Ruffler for Plaiting To Oil the Ruffler To Adjust the Ruffler for Group Plaiting and GatheringSizes of Needles Classes of Work