Singer 127-3 & 128-3 instruction manual Tucker

Page 20

127-3 & 128-3

TUCKER

Remove the presser foot and attach the tuck- er in its place. The width of the tuck is deter- mined by the scale of figures nearest the needle, which shows in eighths and six- teenths of an inch the distance of the edge of the fold from the line of stitching.

The crease or mark for the second and fol- lowing tucks is determined by the scale near- est the operator and this is set by the line in front of the needle hole in the presser foot. For blind tucks without spaces, adjust the scale nearest the operator so that the figure opposite the line on the presser foot will be the same as that at which the guide is locat- ed on the scale nearest the needle. To make spaces between the tucks, move the front scale farther to the left until the desired space is obtained.

Having adjusted the scales for tuck and space as desired, fold the material and crease by hand; pass the folded edge between the spring and spur near you, then between the two blades of the second scale, and back under the presser foot; draw to tile right against the guide, lower the presser bar; see that the lever for the needle clamp to strike is in its backward position so as to form a crease for the next tuck, then proceed with the first tuck.

For the second tuck, fold carefully at the crease made by the spur and place the edge of the first tuck underneath and against the spur at the left. The spur will serve as a guide and will also make a distinct crease for the next tuck. Always place the last tuck against the spur to ensure perfect work.

When making the last tuck, the lever upon which the needle clamp strikes while tucking should be raised to its highest point; while the lever is in this position no crease for a succeeding tuck is made upon the goods.

FIG. 25.

Table of Contents

Previous Page Next Page

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 127-3 With Vibrating ShuttleTable of Contents Instructions for Using the AttachmentsInstructions for Operating the Machines HintsMain Parts To ALL Whom IT MAY ConcernFront View of the Machine Removing the Shuttle To Wind the Bobbin Machine Threaded forTo Thread the Shuttle To Replace the Shuttle To Set the NeedleTo Thread the Needle Threading the NeedleTo Prepare for Sewing Remove the WorkTensions Perfect StitchTo Turn a Corner To Regulate the Length of StitchTo Regulate the Pressure on the Material To Sew Flannel or Bias SeamsBelt Machine Working HeavilyBreaking of Needle Thread. If the needle thread breaks Breaking of Bobbin ThreadTo Oil the Machine Oiling Points AT the Front of the MachineOiling Points in Base of Machine Foot Hemmer -- Hemming Hemming and Sewing on LaceFoot Hemmer -- Felling 127-3 Binder -- Binding Tucker Ruffler On nextTo Attach the Ruffler to the Machine 127-3 Piping a Ruffle To Adjust the Ruffler for Plaiting To Adjust the Ruffler for Group Plaiting and Gathering To Oil the RufflerSizes of Needles Classes of Work

127-3 & 128-3 specifications

The Singer 127-3 and 128-3 are classic sewing machines that have captured the hearts of sewing enthusiasts since their introduction in the early 20th century. These machines are part of the "Sewhandy" line, known for their portability and ease of use, making them particularly popular among home crafters and professionals alike.

One of the main features of the Singer 127-3 and 128-3 is their compact design, which allows for easy transportation and storage. Weighing approximately 12-13 pounds, these machines can be easily carried to sewing classes or craft gatherings, adding to their appeal as versatile tools for sewing on the go.

The Singer 127-3 and 128-3 also showcase many of the innovative technologies that Singer is known for. These machines come with a robust gear-driven mechanism that provides consistent tension and stitch quality, ensuring a smooth sewing experience. The machines offer a variety of stitch options, including straight, zigzag, and a range of decorative stitches, enabling users to take on diverse sewing projects.

Additionally, both models are equipped with a drop-in bobbin system, allowing for easy threading and bobbin changes. This user-friendly feature is particularly beneficial for beginners who may find traditional bobbin systems daunting.

The construction of the Singer 127-3 and 128-3 is characterized by a sturdy metal frame, providing stability during sewing operations and longevity through years of use. The machines also include adjustable stitch length and width, giving sewists the flexibility to customize their sewing according to the fabric and project requirements.

Another noteworthy characteristic is the free-arm capability, which allows for easy maneuverability when sewing tubular items, such as sleeves and pant legs. This feature enhances the overall sewing experience and adds to the machine's functionality.

In summary, the Singer 127-3 and 128-3 are exemplary models that highlight Singer's commitment to quality, portability, and user-friendly design. With their combination of classic aesthetics, reliable performance, and practical features, these machines continue to be a favorite choice for both novice and experienced sewists, embodying the timeless art of sewing.
Top Page Image Contents