R

EDGE 60 Pellet Fireplace

I. Outside Air Kit Installation

Outside air is required on ALL installations. The Out- side Air Kit must be ordered seperately.

Included in Kit: 2 wire ties, 1 collar assembly, 1 termina- tion cap assembly, 1 trim ring, fasteners.

CAUTION! Risk of Fire or Asphyxiation! Do not draw outside combustion air from wall, fl oor or ceiling cavity, or enclosed spaces such as an attic or garage.

•Do not place outside air inlet close to exhaust vents or chimneys. Fumes or odors could be drawn into the room.

•Locate outside air inlet to prevent blockage from leaves, snow/ice, or other debris. Blockages could cause combustion air starvation.

Install Outside Air Kit

•Keep duct runs short and straight to minimize restriction.

•The outside air kit can be installed in three different locations - the left or right side or from the back of the fi replace. Figure 42.1 on page 42.

•Locate the air inlet in a clear area, preferably into prevailing wind during the heating season. Figure 42.2 on page 42.

•Install as shown in Figure 43.1.

•The air duct may be run vertically.

NOTE: 3 Inch (75mm) Aluminum Flex Pipe Not Supplied.

Tools Needed: Phillips Head screwdriver; wire cutters; hole saw or jig saw.

1.Measure distance from fl oor to air vent opening in appli- ance and mark location on wall.

Use saw to cut opening in wall.

•Cut a 3-1/2 to 4 inches (89-102mm) opening on inside wall.

*Cut a 4 to 4-1/2 inches (102-114mm) opening on out- side of house.

2.Use wire tie to secure fl ex pipe to collar assembly.

3.Slide trim ring over fl ex pipe and run pipe through wall.

4.Attach fl ex pipe (not supplied) to outside termination cap with second wire tie.

5.Secure termination cap to outside surface.

6.Secure trim ring to the wall.

Collar

Wire Ties

3 inch Aluminum Flex Pipe (not included)

Trim Ring

Termination Cap

Figure 43.1 - Outside Air Installation

Page 44

7051-158B

December 6, 2011

Page 43 Page 45
Page 44
Image 44
Quadra-Fire 7051-158B owner manual Edge 60 Pellet Fireplace Outside Air Kit Installation, Install Outside Air Kit
Page 43 Page 45

7051-158B specifications

The Quadra-Fire 7051-158B is a premier wood-burning fireplace designed for homeowners seeking an efficient and aesthetically pleasing heating solution. This fireplace combines advanced technology with classic design, making it an exceptional choice for any living space.

One of the key features of the 7051-158B is its impressive heating capability. With a maximum heat output of up to 75,000 BTUs, it can effectively warm areas up to 2,500 square feet. This makes it ideal for both large homes and open-concept areas. The fireplace is equipped with a large firebox that can accommodate logs up to 24 inches, allowing for longer burn times and fewer reloads, thereby enhancing convenience for users.

Efficiency is a major focus of the Quadra-Fire 7051-158B. The unit boasts an impressive EPA-certified efficiency rating, which signifies that it burns wood cleanly and effectively, producing minimal smoke and emissions. This not only benefits the environment but also maximizes the warmth generated from each log of wood burned. The unit is designed to maintain a consistent temperature with its advanced combustion technology, which ensures a clean burn while maximizing heat output.

To enhance user experience, the 7051-158B incorporates several technological features. One such innovation is the Quadra-Fire's patented Four-Point Burn Technology, which promotes optimal airflow and combustion. This technology results in a more complete burn, reducing the amount of creosote buildup in the chimney and enhancing safety. The fireplace also comes with an easy-to-use air control system, allowing homeowners to easily adjust the amount of air entering the firebox for customized heat and burn rates.

From a design perspective, the Quadra-Fire 7051-158B offers a perfect blend of traditional and contemporary aesthetics. The elegant exterior is available in various finishes, enabling homeowners to choose an option that complements their decor. Large glass doors provide a captivating view of the flames, creating a cozy ambiance in any room.

In conclusion, the Quadra-Fire 7051-158B stands out as a top choice for wood-burning fireplaces. With its efficient heating capabilities, cutting-edge technology, and beautiful design, it is sure to enhance both the comfort and appeal of your home. Whether you are looking to heat a large space or simply enjoy the warmth of a wood fire, this fireplace provides a reliable and stylish solution.
Top Page Image Contents