Quadra-Fire 7051-158B Maintaining & Servicing Your Appliance, Before Servicing Your Appliance

R

EDGE 60 Pellet Fireplace

3Maintaining & Servicing Your Appliance

A. Proper Shutdown Procedure

•Set wall control to OFF on AUTOMATIC / MANUAL SET- TING screen. Figure 14.1.

•Wall control screen will scroll through the following mes- sages after setting to OFF.

•Shutdown

•Auto-Clean

•Off

Approximately 45 minutes after setting the wall control to OFF, the appliance should be cool enough to touch. If so, now you can turn the power switch to OFF and pull the appliance foward on the rails.

There is an interlock switch next to the power switch that as you slide the appliance out it will ensure the auto-clean system and the auger will not run, but the blowers will operate.

After servicing, restart with the AUTO/MANUAL SETTINGS screen. Figure 14.1.

Before Servicing Your Appliance

CAUTION! SHOCK AND SMOKE HAZARD!

•Proper Shutdown Procedure must be followed.

•Smoke spillage into room can occur if appliance is not cool before turning off power switch.

•Risk of shock if appliance is not turned off before servic- ing appliance.

Automatic

Manual

Off

Figure 14.1

		Follow the detailed instructions found in this
B. Quick Reference Maintenance Chart		section for each step listed in the chart below.
Cleaning or Inspection	Frequency			Daily	Weekly	Every 2	Monthly	Yearly
						Weeks
Ash Pan - Burning Wood Pellets	Every 5 bags of fuel		OR		X
Ash Pan - Burning Alternate Fuels	Every 1 bag of fuel		OR	X
Ash Removal from Firebox	More frequently depending on the		OR		X
	fuel type or ash build-up
Auto-Clean Inspection	More frequently depending on the		OR				X
	fuel type
Blower, Combustion (Exhaust)	More frequently depending on the		OR					X
	fuel type
Blower, Convection	More frequently depending on the		OR					X
	operating environment
Door Latch Inspection	Prior to heating season		OR				X
Firebox - Prepare for Non-Burn Season	At end of heating season		OR					X
Firepot - Burning Softwood Pellets	Every 5 bags		OR		X
Firepot - Burning Hardwood Pellets	Every 3 bags		OR		X
Firepot - Burning Alternate Fuels	Every 1 bag		OR	X
Glass	When clear view of fi repot		OR		X
	becomes obscured
Heat Exchanger & Drop Tube	Every 1 ton of fuel		OR			X
Hopper	Every 1 ton of fuel or when chang-		OR				X
	ing fuel types
Venting System	More frequently depending on the		OR					X
	fuel type

NOTICE: These are recommendations. Clean more frequently if you encounter heavy build-up of ash at the recommended interval or you see soot coming from the vent. Not properly cleaning your appliance on a regular basis will void your warranty.

Page 14 7051-158B December 6, 2011