R
Installing Front onto Mounting Frame
EDGE 60 Pellet Fireplace
B. Front - Installation
Included in Kit: Front, mounting frame, masonry spacer, fasteners and glove
Tools Required: Phillips Head screwdriver
CAUTION! BURN HAZARD. Allow the front to cool before touching. Do NOT touch without wearing protective glove.
Installing Mounting Bracket on Fireplace
1.Use a Phillips Head screwdriver and attach the mount- ing frame to the face of the fi replace with 5 screws on the top and bottom and 4 on each side. Figure 48.1
2.The front is attached to the mounting frame via the hinges.
3.All 4 fronts are mounted the same way.
Front
Mounting
Frame
Figure 48.1
Hinges Aligned
Figure 48.3
Push Up on
Spring Loaded
Hinge Pin
Figure 48.4
Hinge on Fireplace
Hinge on Front
Start with Bottom Hinge
Alignment and then Top
Figure 48.2
Push Locking Tab into Place to Hold Hinge Pin
Locking Tab
Figure 48.5
December 6, 2011 | Page 49 |
