Quadra-Fire 7051-158B owner manual Edge 60 Pellet Fireplace, Serial Number Label

Models: 7051-158B

1 58
Download 58 pages 35.93 Kb
Page 2
Image 2

R

EDGE 60 Pellet Fireplace

Hearth & Home Technologies welcomes you to our tradition of excellence! In choosing a Quadra-Fire appliance, you have our assurance of commitment to quality, durability, and perfor- mance.

This commitment begins with our research of the market, including ‘Voice of the Customer’ contacts, ensuring we make products that will satisfy your needs. Our Research and Devel- opment facility then employs the world’s most advanced tech- nology to achieve the optimum operation of our stoves, inserts

and fi replaces. And yet we are old-fashioned when it comes to craftsmanship. Each unit is meticulously fabricated and surfaces are hand-fi nished for lasting beauty and enjoyment. Our pledge to quality is completed as each model undergoes a quality control inspection.

We wish you and your family many years of enjoyment in the warmth and comfort of your hearth appliance.

Thank you for choosing Quadra-Fire.

LOCATION OF SERIAL NUMBER LABEL: Right Inside Edge of Outer Can (Fig. 2)

7051-159C

Made in U.S.A. of US and

imported parts.

Fabriqué aux

États-Unis-d’Amérique par des pièces d’origine américaine et pièces importées.

Tested and

O-T L

Portland

Listed by

 

Oregon USA

CUS

OMNI-Test Laboratories, Inc.

Report / Rapport #061-F-75-6.2

Manufactured by: Fabriqué par:

1445 Highway North, Colville, WA 99114

www.quadrafire.com

2012 JAN FEB MAR APR MAY JUNE

2013

JULY AUG SEP OCT NOV DEC

2014

EDGE 60 PELLET

FIREPLACE

007007

Testing Lab & Report No.

Manufacture Date

Serial Number

LOCATION OF CLEARANCE TO COMBUSTIBLES LABEL: Left Hand Panel of Hopper (Fig. 3)

CAUTION:

HOT WHILE IN OPERATION DO NOT TOUCH, KEEP CHILDREN, CLOTHING AND FURNITURE

AWAY. CONTACT MAY CAUSE SKIN BURNS. SEE NAMEPLATE AND INSTRUCTIONS. Operate this unit only with the fuel hopper lid closed. Failure to do so may result in emissions of products of combustion from the hopper under certain conditions. Maintain hopper seal in good condition. Do not

ATTENTION: overfill hopper.

CHAUD LORS DE L'OPÉRATION. NE PAS TOUCHER. GARDEZ LES ENFANTS ET LES VÊTEMENTS LOIN DE L'ESPACE DÉSIGNÉ DE L'INSTALLATION. LE CONTACT PEUT CAUSER DES BRÛLURES À LA PEAU. VOIR L'ÉTIQUETTE ET LES INSTRUCTIONS. Opérez cet appareil avec le couvercle de la trémie fermé. Le défaut de ne pas suivre les instructions peut résulter, sous certaines conditions, en une combustion des émissions des produits venant de la trémie. Ne pas remplir la trémie trop pleine.

Tested and

O-T L

Portland SAFETY LABEL / ÉTIQUETTE DE SÉCURITÉ

Listed by

Oregon USA

 

 

 

C

US

EDGE 60 PELLET FIREPLACE

OMNI-Test Laboratories, Inc.

 

 

 

Listed Solid

Fuel Room Heater/Pellet Type. Also suitable for Mobile Home

Appareil de chauffage de combustible solide/de type de boulettes. Accepté dans

Installation.

This appliance has been tested and listed for use in Manufactured

l'installation dans les maisons mobiles. Cet appareil a été testé et enregistré pour l'usage

Homes in accordance with OAR 814-23-9000 through 814-23-909.

 

dans les Maisons Mobiles en accord avec OAR 814-23-9000 jusqu'à 814-23-909.

Open Front. Serial Number Label located on right side inside edge of outer can.

Tested to: ASTM E1509-04, ULC S628-93, ULC/ORD-C1482-M1990 Room Heating Pellet Burning Type, (UM)

84-HUD FOR USE ONLY WITH PELLETIZED WOOD. SEE OWNER’S MANUAL FOR OTHER FUEL OPTIONS.

OMNI-Test Laboratories, Inc. has determined that this appliance complies with Canadian Standards Association (CSA) B415.1 and Title 40 of the U.S. Code of Federal Regulations, Part 60,

SubPart AAA.OMNI-Test Laboratories Accrediations: The Standards Council of Canada, the American National Standards Institute, and the U.S. Environmental Protection Agency.

Input Rating: 52,000 BTU/HR.

Electrical Rating: 115 VAC, 60 Hz, Start 5 Amps, Run 1.25 AMPS.

DANGER: Risk of Electric Shock. Disconnect Power Before Servicing Unit.

Replace glass only with 5mm ceramic available from your dealer.

To start, set thermostat above room temperature, the stove will light automatically. To shutdown, set thermostat to below room temperature. For further instruction refer to owner's manual.

Keep viewing & ash removal doors tightly closed during operation.

PREVENT HOUSE FIRES

Install and use only in accordance with manufacturer's installation and operating instructions. Contact local building or fire officials about restrictions and inspection in our area.

WARNING: FOR MOBILE HOMES: Do not install appliance in a sleeping room. An outside combustion air inlet must be provided. The structural integrity of the mobile home floor, ceiling and walls must be maintained.

Refer to manufacturer's instructions and local codes for precautions required for passing chimney through a combustible wall or ceiling. Inspect and clean vent system frequently in accordance with manufacturer's instructions.

Areas of the fireplace incorporating warm or cold air ducts shall be enclosed according to the manufacturer’s installation instructions. Components required for all installations: Outside Air Kit, Part Number OAK-3.

DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVICING ANOTHER APPLIANCE.

Use a 3 or 4 inch (76-102mm) diameter type "L" or "PL" venting system. CAUTION: Combustion air openings are not to be obstructed. CAUTION: It is necessary that this fireplace have air for proper operation. Please refer to the owners mannual for possible consequences of improper ventilation.

Testé à: ASTM #1509-04, ULC S628-93, ULC/ORD-C1482-M1990 Room Heating. Pellet Burning Type, UM) 84-HUD POUR USAGE AVEC LES BOULETTES DE BOIS. VOIR LE MANUAL DU PROPRIÉTAIRE POUR

D’AUTRES OPTIONS DE CARBURANT.

OMNI-Test Laboratories, Inc. a déterminé que cet appareil se conforme avec la norme de l’Association Canadienne de normalisation (CSA) B415.1 ainsi que le Titre 40 du Code Fédéral de Régulations des États-Unis, partie 60,

sous-partie AAA. Accréditations OMNI-Test Laboratories : Le Conseil Canadien des Normes (CCN/SCC), l’Institue des Standards Nationaux Américain (ANSI) et l’Agence de Protection Environnemental (EPA).

Puissance de Rendement: 52,000 BTU/HR

Puissance Électrique: 115 VAC, 60 Hz, Début 5 Amps, Courir 1.25 Amps,

DANGER: Il y a risque de décharge électrique. Déconnectez le fil électrique de la prise de contact avant le service. Remplacez la vitre seulement avec une vitre céramique de 5 mm disponible chez votre fournisseur.

Pour allumer, monter la température du thermostat au dessus de la température de la pièce, le poêle s'allumera automatiquement. Pour éteindre, descendre la température du thermostat en dessous de la température de la pièce. Pour des instructions supplémentaires, référez vous au manuel du propriétaire. Gardez la porte d'ouverture et la porte des cendres fermées hermétiquement durant l'opération.

PRÉVENTION DES FEUX DE MAISON

Installez et utilisez en accord avec les instructions d'installation et d'opération du fabricant. Contactez le bureau de la construction ou le bureau des incendies au sujet des restrictions et des inspections d'installation dans votre voisinage. Ne pas obstruez l'espace en dessous de l'appareil.

AVIS - Pour Les Maisons Mobiles: Ne pas installer dans une chambre à coucher. Un tuyau extérieur de combustion d'air doit être installé et ne doit pas être obstrué lorsque l'appareil est en usage. La structure intégrale du plancher, du plafond et des murs de la maison mobile doit être maintenue intacte.

Référez vous aux instructions du fabricant et des codes locaux pour les précautions requises pour passer une cheminée à travers un mur ou un plafond combustibles, et les compensations maximums.

Inspectez et nettoyez la cheminée fréquemment.

Domaines de la cheminée incorporant les gaines d'air chaud ou froid doivent être enfermés en conformité avec les instructions d'installation du fabricant.

Les composants requis pour tout l'installations. Assemblage d'air extérieur, Numéro de Pièce OAK-3.

Ne pas connecter cet appareil à une cheminée servant un autre appareil.

Utilitsez le système de ventilation de 3 or 4 inch (76-102mm) de diametre de type “L” ou “PL”. ATTENTION: ouvertures d'air de combustion ne doivent pas être obstruées.

ATTENTION: Il est nécessaire que ce foyer ont l'air d'un bon fonctionnement. S'il vous plaît se référer à des propriétaires mannual pour les conséquences possibles d'une mauvaise ventilation.

Figure 2 - Serial Number Label

MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS

 

 

 

 

 

 

 

 

 

 

 

ESPACES LIBRES MINIMUM DES MATÉRIAUX COMBUSTIBLES

A Standoff to Back Wall

0 in. (0mm)

 

 

B

 

 

 

 

C

A

Surfaces Mur de arrières

0 in (0mm)

B Standoff to Side Walls

0 in (0mm)

 

 

 

 

 

 

 

B

Surfaces Mur de côté

0 in. (0mm)

 

 

 

 

 

 

 

 

 

 

 

C Top Standoff to Header

0 in (0mm)

A

 

A

 

 

 

 

 

 

 

 

C

Surfaces supérieurs à la boutisse

0 in. (0mm)

D Vent Pipe to Combustible

*

 

 

 

 

 

 

 

 

 

 

 

D

Du conduits des combustibles

*

E Floor Protection under Fireplace

None Required

 

 

 

 

 

 

 

 

 

 

 

E

Protection du plancer dessus cheminéel: Ne pas requis

* Use Pipe Manufacturer’s Listed Clearances, 1 inch (25mm) Minimum

*Voir le fabricant pour les espaces libres des conduits enregistré, 1 inch (25mm) minimum

 

 

 

 

 

 

 

 

 

 

 

 

 

F Floor Protection Hearth Extension From Door Opening

6 in (152mm)

 

 

 

 

 

 

G Floor Protection to the Side of Door Opening

6 in (152mm)

 

 

 

 

 

 

F Portection du plancer agrandissement du foyer à ouverture du port: 6 in (152mm)

 

 

 

 

 

 

G Portection du plancer de côté à ouverture du port:

6 in (152mm)

 

 

 

 

 

 

ALL MATERIAL USED FOR FLOOR PROTECTION MUST BE NON-COMBUSTIBLE

 

 

G

F

DO NOT REMOVE THIS LABEL

NE PAS ENLEVER L'ÉTIQUETTE

7051-148C

Slide fireplace out on the rails. Clearance to Combustible Label located on left side of hopper.

Figure 3 - Clearance to Combustibles Label

Page 2

7051-158B

December 6, 2011

Page 2
Image 2
Quadra-Fire 7051-158B owner manual Edge 60 Pellet Fireplace, Serial Number Label