Starting Your First Fire, Ignition Cycles

EDGE 60 Pellet Fireplace

G. Filling the Hopper with Fuel

•Check the hopper and make sure it is empty before ﬁ lling with fuel.

•Open the front to expose the hopper door. Pull down on the hopper door to open and ﬁ ll with fuel. The hopper door can now serve as a shelf to support the bag of fuel

3. Automatic or Manual Setting

The automatic setting will control the heat output based on the comfort level selection. The manual setting allows you to manually control the heat output settings.

•Do not over ﬁ ll the hopper. The hopper door must be com- pletely closed to maintain proper vacuum and for the feed motor to operate. An error ICON will appear on the wall control if the hopper door is not properly closed.

•Do not leave any part of the fuel bag on the appliance after ﬁ lling hopper.

NOTICE: RAISED PLATFORM INSTALLATIONS

Consideration must be given for ﬁ lling the hopper with fuel when determining the height of the raised platform. It must not be so high that it interferes with the safety of ﬁ lling the hopper with fuel.

H. Starting Your First Fire

1. Fuel Selection

To start your ﬁ rst ﬁ re, you must:

•Select the appropriate fuel on the FUEL SELECTION screen on the thermostat wall control to match the fuel you have chosen to burn.

•If the proper fuel is not selected your appliance will not operate properly.

I. Ignition Cycles

The ﬁ replace engine is controlled by the digital thermostat wall control. The digital display on the wall control will tell you what your appliance is doing in the upper left corner (System Status). Figure 10.3.

System Status

READY

12:30 PM

Set at: 73

HEAT OUTPUT

Figure 10.3

Every time the thermostat calls for heat, the appliance steps through ﬁ ve cycles:

1	Start-Up Cycle	4	Shutdown Cycle
2	Soft-Start Cycle	5	Auto-Clean Cycle

3	Heating Cycle

•For example, if you have selected wood pellets and you are burning corn, the appliance may not light, it may go out or overfeed. Figure 10.1.

NOTE: If you are lighting your appliance for the ﬁ rst time:

•The feed tube will be empty and it can take some time to ﬁ ll it with fuel before you will see a ﬁ re

•Put a handful of fuel in the ﬁ repot (priming) to speed up the process. You can also do this when you have run com- pletely out of fuel.

FUEL SELECTION

	Corn
	Corn
	Utility Pellet


	Softwood Pellet
	Sunflower Seeds
	Wheat
	Hardwood Pellet


DONE	SELECT

Figure 10.1

2. Comfort Level Selection

Once your fuel is selected, select the temperature at the desired setting on the SET COMFORT LEVEL screen. Figure 10.2.

The duration and characteristics of these cycles may be dif- ferent with each type of fuel selected.

WARNING! RISK OF FIRE!

Do NOT operate appliance:

•With appliance door open

•With ﬁ repot ﬂ oor open

•With ash pan removed

•Without the two slide rail attachment bolts secured to ﬁ replace

1.Start-Up Cycle

During this cycle:

•Igniter turns on for 90 seconds to heat up the air in the ﬁ repot

•Combustion blower starts

•Vacuum switch comes on

•Feed motor turns on adding fuel to the ﬁ repot and the appliance waits for the ﬁ re to start

The duration of start-up depends on the type and quality of fuel used. It is normal to see some smoke during the ignition process as moisture evaporates and the fuel lights. The smoke will stop once the ﬁ re starts.

Figure 10.2

Page 10

7051-158B

December 6, 2011

7051-158B specifications

The Quadra-Fire 7051-158B is a premier wood-burning fireplace designed for homeowners seeking an efficient and aesthetically pleasing heating solution. This fireplace combines advanced technology with classic design, making it an exceptional choice for any living space.

One of the key features of the 7051-158B is its impressive heating capability. With a maximum heat output of up to 75,000 BTUs, it can effectively warm areas up to 2,500 square feet. This makes it ideal for both large homes and open-concept areas. The fireplace is equipped with a large firebox that can accommodate logs up to 24 inches, allowing for longer burn times and fewer reloads, thereby enhancing convenience for users.

Efficiency is a major focus of the Quadra-Fire 7051-158B. The unit boasts an impressive EPA-certified efficiency rating, which signifies that it burns wood cleanly and effectively, producing minimal smoke and emissions. This not only benefits the environment but also maximizes the warmth generated from each log of wood burned. The unit is designed to maintain a consistent temperature with its advanced combustion technology, which ensures a clean burn while maximizing heat output.

To enhance user experience, the 7051-158B incorporates several technological features. One such innovation is the Quadra-Fire's patented Four-Point Burn Technology, which promotes optimal airflow and combustion. This technology results in a more complete burn, reducing the amount of creosote buildup in the chimney and enhancing safety. The fireplace also comes with an easy-to-use air control system, allowing homeowners to easily adjust the amount of air entering the firebox for customized heat and burn rates.

From a design perspective, the Quadra-Fire 7051-158B offers a perfect blend of traditional and contemporary aesthetics. The elegant exterior is available in various finishes, enabling homeowners to choose an option that complements their decor. Large glass doors provide a captivating view of the flames, creating a cozy ambiance in any room.

In conclusion, the Quadra-Fire 7051-158B stands out as a top choice for wood-burning fireplaces. With its efficient heating capabilities, cutting-edge technology, and beautiful design, it is sure to enhance both the comfort and appeal of your home. Whether you are looking to heat a large space or simply enjoy the warmth of a wood fire, this fireplace provides a reliable and stylish solution.

Quadra-Fire 7051-158B Edge 60 Pellet Fireplace Filling the Hopper with Fuel, Ignition Cycles

Models: 7051-158B