Singer 127-3 & 128-3 instruction manual Piping a Ruffle To Adjust the Ruffler for Plaiting

Page 24

127-3 & 128-3

Piping a Ruffle

To Adjust the Ruffler for Plaiting

Insert the material to be ruffled between the two blue blades, following the line 2, in Fig.

26.This material must not be over 1 1/4 inch- es wide, as it is carried through the ruffler with the finished edge of the ruffle to the right of the attachment as shown In Fig. 30

The material for piping must measure about 1/4 inch wide when folded in the centre and is usually cut on the bias. Place the piping material in the ruffler, following the line 4, in Fig. 26, with the folded edge of the piping to the right. The material to which the piping and ruffling are to be sewn should be folded on the edge and inserted in the ruffler, following the line 5, in Fig. 26.

Raise the adjusting lever (E, Fig. 31) and move it to the right so that the projection (D, Fig. 31) will enter the slot marked "6" in the adjusting lever when the lever is released. The ruffling blade will then move forward and back once at every six stitches. To adjust the ruffling blade to make a plait once at every twelve stitches, place the adjusting lever (E, Fig. 31) so that the projection (D) enters the slot marked "12" in the adjusting lever. Insert the material to be plaited between the two blue blades, following the line 2, (Fig. 26). The size or width of plaits is regulated by the adjusting screw (C, Fig. 31) and the adjusting finger (F, Fig. 31). To make a wider plait, move the adjusting finger (F) back or toward the needle and turn the adjusting screw (C) downwardly. To make a smaller plait, turn the adjusting screw (C) upwardly. The distance between plaits is regulated by the length of stitch.

FIG. 30.

FIG. 31.

Table of Contents

Previous Page Next Page

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 127-3 With Vibrating ShuttleTable of Contents Instructions for Using the AttachmentsInstructions for Operating the Machines HintsMain Parts To ALL Whom IT MAY ConcernFront View of the Machine Removing the Shuttle To Wind the Bobbin Machine Threaded forTo Thread the Shuttle To Replace the Shuttle To Set the NeedleTo Thread the Needle Threading the NeedleTo Prepare for Sewing Remove the WorkTensions Perfect StitchTo Turn a Corner To Regulate the Length of StitchTo Regulate the Pressure on the Material To Sew Flannel or Bias SeamsBelt Machine Working HeavilyBreaking of Needle Thread. If the needle thread breaks Breaking of Bobbin ThreadTo Oil the Machine Oiling Points AT the Front of the MachineOiling Points in Base of Machine Foot Hemmer -- Hemming Hemming and Sewing on LaceFoot Hemmer -- Felling 127-3 Binder -- Binding Tucker Ruffler On nextTo Attach the Ruffler to the Machine 127-3 Piping a Ruffle To Adjust the Ruffler for Plaiting To Adjust the Ruffler for Group Plaiting and Gathering To Oil the RufflerSizes of Needles Classes of Work

127-3 & 128-3 specifications

The Singer 127-3 and 128-3 are classic sewing machines that have captured the hearts of sewing enthusiasts since their introduction in the early 20th century. These machines are part of the "Sewhandy" line, known for their portability and ease of use, making them particularly popular among home crafters and professionals alike.

One of the main features of the Singer 127-3 and 128-3 is their compact design, which allows for easy transportation and storage. Weighing approximately 12-13 pounds, these machines can be easily carried to sewing classes or craft gatherings, adding to their appeal as versatile tools for sewing on the go.

The Singer 127-3 and 128-3 also showcase many of the innovative technologies that Singer is known for. These machines come with a robust gear-driven mechanism that provides consistent tension and stitch quality, ensuring a smooth sewing experience. The machines offer a variety of stitch options, including straight, zigzag, and a range of decorative stitches, enabling users to take on diverse sewing projects.

Additionally, both models are equipped with a drop-in bobbin system, allowing for easy threading and bobbin changes. This user-friendly feature is particularly beneficial for beginners who may find traditional bobbin systems daunting.

The construction of the Singer 127-3 and 128-3 is characterized by a sturdy metal frame, providing stability during sewing operations and longevity through years of use. The machines also include adjustable stitch length and width, giving sewists the flexibility to customize their sewing according to the fabric and project requirements.

Another noteworthy characteristic is the free-arm capability, which allows for easy maneuverability when sewing tubular items, such as sleeves and pant legs. This feature enhances the overall sewing experience and adds to the machine's functionality.

In summary, the Singer 127-3 and 128-3 are exemplary models that highlight Singer's commitment to quality, portability, and user-friendly design. With their combination of classic aesthetics, reliable performance, and practical features, these machines continue to be a favorite choice for both novice and experienced sewists, embodying the timeless art of sewing.
Top Page Image Contents