APC ACSC101, ACSC100 General Information, Overview, Symbols used in this manual

Page 7

General Information

Overview

Note the definitions for the icons here and be observant for them throughout this manual. They are intended to call attention to potential hazards and important information.

Symbols used in this manual

Electrical Hazard: Indicates an electrical hazard which, if not avoided, could result in injury or death.

Danger: Indicates a hazard which, if not avoided, could result in severe personal injury or death.

Warning: Indicates a hazard which, if not avoided, could result in personal injury or damage to product or other property.

Heavy: Indicates a heavy load that should not be lifted without assistance.

Caution: Indicates a potential hazard which, if not avoided, could result in damage to the equipment or other property.

Tip Hazard: This equipment is easily tipped. Use extreme caution when unpacking or moving.

Note: Indicates important information.

Indicates that more information is available on the same subject.

Cross-reference symbol used in this manual

See another section of this document or another document for more information on this subject.

InRow SC Operation

1

Image 7
Contents Operation 동봉된 CD 안에 한국어 매뉴얼이 있습니다 Contents Network Management Card Maintenance American Power Conversion Legal Disclaimer Overview Symbols used in this manualCross-reference symbol used in this manual General InformationSafety Ensure that Inspection ChecklistsInitial inspection checklist CommissioningMechanical inspection checklist Electrical inspection checklistWhile the cooling unit is operating, ensure that User interface inspection checklistStart-up inspection checklist Final inspection checklistDisplay Interface OperationMain menu screens Using the Display InterfaceScrolling status screens Status Screen Name Status Information DisplayedNavigating the sub-menus Navigating the main menuPassword entry Using the Path statementStop the cooling unit Start the cooling unitCooling unit configuration General ConfigurationView the state of input and output contacts ContactsEdit the normal state of input and output contacts Configure the cooling group Cooling Group ConfigurationIdentify the cooling unit Configure ModbusSetpoints Control the EnvironmentSupply Air Thresholds Run hoursService intervals Password & time-out Display SettingsDate and time Display units Configure displayConfigure network Network ConfigurationCooling unit status View Status ReadingsAbout the cooling unit Cooling group statusModel Event Log Respond to AlarmsDisplayed Alarm Message Severity Action Required Alarm messages and suggested actionsThreshlds screen Configure Unit Discrete I/O screen. See page 17 for more Overview Quick ConfigurationTCP/IP configuration methods Network Management CardBootp & Dhcp configuration APC Device IP Configuration WizardIni file utility NetworkTCP/IPBoot ModeDHCP onlyAdvancedDHCP Cookie Is Remote access to the control console Local access to the control consoleChoose Network from the Control Console menu Control consoleWeb interface Access a Configured Network Management CardTelnet and SSH Modbus Simple Network Management Protocol SnmpRecover From a Lost Password Environment MaintenanceMonthly Preventive Maintenance CleanlinessElectrical MechanicalFunctional tests Quarterly Preventive MaintenanceSemi-Annual Preventive Maintenance Problem Possible Cause Corrective Action TroubleshootingProblem Possible Cause Non-transferable warranty Exclusions WarrantyOne-Year Factory Warranty Terms of warrantyWarranty claims Page Page 2009 990-2684A-001