Audio-Technica ATH-ANC3 Installing your battery, Using your headphones, For noise-cancelling only

Page 4

6

English

 

 

Installing your battery

The ATH-ANC3 requires one AAA battery for operation (included). Use only disposable AAA alkaline batteries. Do not use rechargeable batteries.

1.Move power switch to the “OFF” position.

2.Turn control box over to access battery compartment.

3.Open battery cover by sliding the cover in the direction of the arrow on the cover.

4.Insert AAA battery, observing correct polarity as marked.

5.Close battery compartment cover.

Selecting your replaceable rubber tips and checking fit of the headphones

The Medium sized rubber tips are attached to the headphones at shipment. If these do not fit your ears, replace them with the Small or the Large rubber tips. It is important to have the correct and comfortable fit; an incorrect fit will degrade both the noise-cancelling and audio function of your headphones.

Using your headphones

1.Connect the headphone cable to the extension cable if needed, making certain the plug is firmly seated.

2.Connect the headphone cable (or extension cable) to the headphone jack of your audio device.

•Use 3.5 mm (1/8") stereo mini plug to connect to MP3, CD player, DVD player, computer, and other audio devices equipped with a 3.5 mm output jack.

•Use included airline adapter to connect to typical airline audio systems. Note: The headphones cannot be used with devices equipped with

2.5 mm or 1/4" headphone jacks without purchase of an adapter. Please purchase an optional mono/stereo adapter for use with a mono device. (Without use of an adapter, the right channel is muted when headphones are connected to a mono device.)

3.Wear the left headphone (marked L) in your left ear; and the right headphone (marked R) in your right ear.

Note: the L and R designations are at the base of the cable strain relief near where the cable exits the headphone. Insert the rubber tip on the headphone into your ear so it fits snugly and comfortably. If fit is not correct, please see Selecting your replaceable rubber tips, page 6. Do not push beyond the ear canal opening.

4.To activate noise-cancelling function, move the power switch on your control box to the “ON” position; power indicator should light (red). Note: The red power LED is extinguished when the monitor button is pressed. (If you do not wish to use the active noise-cancelling function, move power switch to the “OFF” postion.)

5.Turn on your audio device. (Volume should be set at a low level at first; adjust as necessary on audio device.) If the noise-cancelling function and/or low frequency response seems to be missing, check to make certain the headphones fit correctly and that there is a good seal between the ear canal and the rubber tip on your headphone; see Selecting your replaceable rubber tips, page 6.

For noise-cancelling only

1.To activate noise-cancelling function, move the power switch on your control box to the “ON” position; power indicator should light (red). In this case, there is no need to connect the headphone cable to an audio device; simply turn the headphones on and wear them.

After using

•After you have finished using your headphones, be certain to move the power switch to the “OFF” position.

•Remove battery when you will not be using the headphones for an extended period.

•Store the headphones and accessories in the included protective carrying case.

•To clean the headphones, wipe the earpiece and control pack with a clean, soft cloth. Do not use solvents.

•For periodic cleaning of rubber tips, remove from headphones and wash rubber tips with warm water. Make certain rubber tips are completely dry before reinstalling on headphones. Check for any obstructions in the rubber tip.

•Rubber tips will wear over time. Replacement rubber tips are available from Audio-Technica dealers.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents ATH-ANC3 Battery precautions EnglishCompliance with FCC rules USA only Canada onlyIncluded Accessories ATH-ANC3 QuietPoint Noise-Cancelling HeadphonesIntroduction Installing your battery Using your headphonesFor noise-cancelling only After usingATH-ANC3 Specifications Troubleshooting GuideProblem Solution Français AvertissementsAvertissements Mesures de sécurité relatives aux pilesAccessoires fournis Installation de la pileÉcouteurs à réduction de bruit ATH-ANC3 QuietPoint Guide de dépannage Utilisation des écouteursCaractéristiques techniques Advertencias EspañolIntroducción Auriculares con cancelación del ruido ATH-ANC3 QuietPoint Instalación de la pilaAccesorios incluidos AAA desechables. No use pilas recargablesUso de los auriculares Guía de solución de problemasEspecificaciones Avvertenze ItalianoIntroduzione Installazione della batteria Accessori inclusiUtilizzo Guida alla risoluzione dei problemiSpecifiche tecniche Einleitung DeutschBatterievorkehrungen So setzen Sie die Batterie ein Verwenden Sie keine wieder aufladbaren BatterienFehlerbehebung Benutzen der KopfhörerTechnische Daten Page Page Page Audio-Technica Limited Audio-Technica U.S., IncAudio-Technica Greater China Limited

ATH-ANC3 specifications

The Audio-Technica ATH-ANC3 is a pair of premium noise-cancelling in-ear headphones designed for audiophiles and casual listeners alike. As part of Audio-Technica's renowned lineup of audio products, the ATH-ANC3 combines advanced technology and user-friendly features to provide a superior listening experience.

One of the most notable features of the ATH-ANC3 is its active noise-cancelling (ANC) capability. This technology utilizes built-in microphones to detect external sounds and generate inverse sound waves to effectively cancel out ambient noise. This results in a more immersive listening experience, allowing users to enjoy their favorite music or podcasts without the interference of surrounding sounds, making them ideal for travel or busy environments.

The ATH-ANC3 is equipped with high-resolution 12 mm drivers that deliver a rich and detailed sound signature. The headphones reproduce a wide frequency range, ensuring that both the highs and lows are clear and balanced. This is complemented by the in-ear design that provides passive noise isolation, further enhancing the overall audio quality.

Another key characteristic of the ATH-ANC3 is its wireless connectivity. Featuring Bluetooth technology, users can enjoy the freedom of movement without being tethered to their devices. The headphones are compatible with most Bluetooth-enabled devices, allowing for seamless pairing and stable connections. Additionally, the ATH-ANC3 supports aptX codec for improved audio streaming quality, making it an excellent choice for high-fidelity sound.

For prolonged usage, the ATH-ANC3 includes a compact and lightweight design, providing comfort even during extended listening sessions. The in-ear tips come in multiple sizes to ensure a snug fit, further enhancing noise isolation and comfort. The battery life is also impressive, offering several hours of playback time on a single charge, with the added convenience of a quick-charge feature for those on the go.

Moreover, the ATH-ANC3 includes intuitive controls for playback and call management, allowing users to easily adjust volume, skip tracks, or answer calls with just a tap. With sweat and water-resistant construction, these headphones are also suitable for workouts or outdoor activities.

In summary, the Audio-Technica ATH-ANC3 stands out with its robust feature set, combining advanced noise-cancelling technology with high-quality audio performance and user-centric design. Whether commuting, traveling, or simply enjoying music at home, the ATH-ANC3 is a versatile audio solution that caters to a wide range of listening preferences.
Top Page Image Contents