How to use
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
SWITCH
ON-OFF switch
To turn cleaner on, push switch up. To turn cleaner off, push switch down to the OFF posi- tion.
To transport
To move your cleaner from room to room, put handle in upright position, tilt cleaner back on large rear wheels and push forward.
Self Propel feature
Note: The Self Propel feature will operate only when motor is turned on.
This feature moves the cleaner forward and backward at a variable rate of speed controlled entirely by you.
Your cleaner also has a conve- nient carrying handle located on the back of the cleaner.
Self Propel
Control
Button
To move forward
Push handle grip forward and guide cleaner in front of you. The cleaner will move in a forward direction with little effort.
To move backward
Gently pull handle grip back and guide the cleaner toward you. Guide cleaner carefully at first until you have adjusted to the ease of operation.
Handle positions
The handle of your cleaner has three positions: upright for storage and tool use; operat- ing for general operation on carpet and floors; low for cleaning under low furniture. Lower handle by stepping on handle release pedal at rear of cleaner.
UPRIGHT
OPERATING
LOW
Self Propel control button
For increased control of the cleaner in tight places such as around and under furniture, or on
Edge cleaning
Brushed edge cleaning is provided on the right side of the cleaner to remove embedded dirt in the carpet near baseboards and furniture. Guide right side of cleaner parallel to edge of carpet or furniture for brushed edge cleaning.
Standard edge cleaning is pro- vided on the left side of cleaner to remove surface dust and litter.
7
8