M
O
N
P
Insert screw and secure handle to cleaner body.
Attach nozzle
Line up raised rib (M) on front of nozzle with raised rib just above opening on cleaner. Push nozzle securely into cleaner.
Push nozzle cord into clip (N) at back of cleaner.
Insert nozzle plug into receptacle (O) on back of cleaner. Push plug firmly to ensure it is fully inserted.
Button cord strap (P) onto receptacle.
Q
S
R
Attach hose and tool
Facing the back of the cleaner, position hose connector (Q) into holder (R) on right side of cleaner body making sure latch (S) is inside holder.
U
Loop hose over hose hook (T) and posi- tion tool into holder (U) on other side of cleaner body.
2. How to use
Operate cleaner only at voltage speci- fied on data plate located on back of cleaner motor housing.
Polarized plug
To reduce the risk of electric shock, this product has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a quali- fied electrician to install the proper outlet. Do not change the plug in any way.
Plug cord into electrical outlet. Your cleaner in now ready to operate.
A
A
I
O
B
Press switch down to turn OFF (O); press switch toward handle to turn
ON (I ).
Powered nozzle
The powered nozzle has a Brush Roll Switch (A) which allows you to turn the brush roll ON or OFF during quick pick- ups and light cleaning on hard surface floors, carpet and rugs.
The brush roll is visible through the Brush View Window (B).
Carpet/Rug cleaning
With cleaner turned ON, push Brush Roll Switch (A) on nozzle to ON/CARPET.
Hard surface floor cleaning
With cleaner turned ON, push Switch (A) to OFF/HARD FLOOR.
4