Hoover FloorMATETM The Hard Floor Cleaner owner manual Assemble handle

Page 16

Assemble handle		1-3
			B

1-2
	A

1-4

Assemble Handle

Press down on latch (A) and remove clean solution tank from upper handle.

With cord hook (B) to back of cleaner, push upper handle down onto cleaner. Insert short screw in front of tank area. Tighten screw with a Phillips screw- driver.

Insert the two longer screws into back of handle as shown. Tighten with a Phillipa screwdriver.

1-5

Replace clean solution tank by posi- tioning bottom first. Press latch and snap top portion into place.

Continued

Image 16

Contents FloorMATE Hard Floor Cleaner Recommended cleaning Cleaning sealed wood floorsIndex 10-11Assembly Carton contentsQuestions or Concerns? Grounding InstructionsPage ON/OFF Switch Handle Release Pedal How to useTo transport General Operation TanksRecovery Tank lower tank Automatic Shut-Off WET modeTo Clean Filter How to EmptyTurn cleaner off and disconnect from electrical outlet To Clean Floor vinyl, tile, linoleum, etc How to cleanDry hands and plug cleaner into a properly grounded outlet Maintenance Cleaning Sealed Wood FloorsCleaning the brushes Dry hands and plug cleaner in to a properly grounded outletCleaning the Nozzle StorageIf you have a problem ServiceFull One Year Warranty Domestic UsePage Assembly Assemble handle