Hoover FloorMATETM The Hard Floor Cleaner Assembly, Questions or Concerns?, Carton contents

Page 3

Questions or Concerns?

The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its use. Look on the list provided with the product for your local Hoover Factory Service Center or in the Yel- low Pages under “Vacuum Cleaners - Household” for the nearestAuthorized Hoover Warranty Service Dealer (Depot) or call:

1-800-944-9200for an automated referral of authorized service outlet locations (U.S. only) OR 1-330-499-9499 to speak with a representative in the Hoover Consumer Response Center OR Visit us online at www.hoover.com to find the service outlet nearest you (click on the “Service” button)

Grounding Instructions

A

B

C

This appliance must be grounded. If it should malfunction or breakdown, ground- ing provides a path of least resistance for electrical current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-ground- ing conductor (C) and grounding plug (A). The plug must be plugged into an appro- priate outlet (B) that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER-

Improper connection of the equipment- grounding conductor can result in the risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provid- ed with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in sketch (A).

A temporary adapter (D) may be used to connect this plug to a 2-pole receptacle

(E)if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (B) can be installed by a qualified

D F

G

E

electrician. The green colored rigid ear, lug, or the like (F) extending from the adapter must be connected to a perma- nent ground (G) such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. NOTE: In Canada, the use of a temporary adapter is not permit- ted by the Canadian Electrical Code.

1. Assembly

1-1

C

AB

F

DE

Carton contents

A. Hard floor cleaner

B. Upper handle

C.Screw packet (3 screws-1 with washer)

D.Brush block

E.Nozzle

F.Floor detergents

Assemble handle

1-2

A

Assemble Handle

Press down on latch (A) and remove clean solution tank from upper handle.

The assembled cleaner will

look like this drawing.

This cleaner is intended for household use.

Continued 3

Image 3
Contents FloorMATE Hard Floor Cleaner 10-11 Recommended cleaningCleaning sealed wood floors IndexGrounding Instructions AssemblyCarton contents Questions or Concerns?Page How to use ON/OFF Switch Handle Release PedalTo transport Tanks General OperationAutomatic Shut-Off WET mode Recovery Tank lower tankHow to Empty To Clean FilterTurn cleaner off and disconnect from electrical outlet How to clean To Clean Floor vinyl, tile, linoleum, etcDry hands and plug cleaner into a properly grounded outlet Dry hands and plug cleaner in to a properly grounded outlet MaintenanceCleaning Sealed Wood Floors Cleaning the brushesStorage Cleaning the NozzleService If you have a problemDomestic Use Full One Year WarrantyPage Assembly Assemble handle