CLEANING TOOLS*
!IMPORTANT: When using cleaning tools, the cleaner must be kept in the upright (parked) position, particularly when cleaning stairs.
The carpet height selector should also be set to tool mode:
STAIR STABILISER*
The Stair Stabiliser has been designed to improve cleaner stability when you pull on the hose while stair cleaning. It can be adjusted to suit any staircase.
Location
Pet Hair & Allergen Remover * (Certain models only)
Ideal for removing pet hairs.
Do not touch the rotating brush.
Telescopic Tube*
Fitted on the flexible hose and with accessories at its end, it is ideal for stair cleaning.
It extends to minimise stretching and bending.
All accessories can fit on the end of the flexible hose. Combine accessories depending on use.
* |
* |
The Stabiliser, stability device, is located at the back of the cleaner.
Pull the bottom of the device to release it from its storage position.
Operation
Lift the device upwards to the position shown in the diagram.
Simultaneously squeeze the finger tabs and extend the device.
ALWAYS attach hose retainer to hook when using cleaning tools. Unhook after use.
CLEANING THE STAIRS
It is dangerous to place the cleaner above you whilst cleaning the stairs.
ALWAYS work with the cleaner below you. Ensure it is positioned up against the bottom step.
DO NOT attach hose retainer when cleaning the stairs.
* Features vary according to model
Use
Place the cleaner against the stairs and the Stair Stabiliser in the position shown. Use the stair cleaning hose and accessories as usual.
To return the cleaner to carpet mode repeat the above process in reverse.
28/11/2007 15:43:24