CLEANING THE FILTERS*
Washing filter and foam:
Rotate the BLUE filter pack until the unlock position to release it from the dust container.
Separate the GREY foam filter from the BLUE filter pack using the tab provided.
Wash the GREY foam filter thoroughly.
Gently tap to release excess dust. Wash the filter with the BLUE housing from the inside.
DO NOT USE HOT WATER OR DETERGENTS!
Remove excess water by shaking and leave to dry for 24 hours. Refit filters only when completely dry.
Do not use a brush as this will damage the filter.
* Features vary according to model
Washing
The
The Carbon filter is normally maintenance free, this component should not be washed. If a replacement is required please contact our spares department.
The exhaust filter should be washed every month. Press down on the latch to remove the exhaust cover and filter.
Wash filters under hand warm water.
DO NOT USE HOT WATER OR DETERGENTS!
Remove excess water by shaking and leave to dry for 24 hours. Refit filters only when completely dry.
!IMPORTANT: For optimum cleaning performance, always keep your filters clean.
28/11/2007 15:43:27