Vacuuming Programs
Normal. Timer: Auto | Quick. Timer: 10min | Spot |
Select program? | Select program? | Select program? |
Normal vacuuming
When you start Trilobite it is ready to start vacuuming using the Normal program and automatic time calculation.
1.When Trilobite is switched off or placed in the charger, press to start.
2.Press to start vacuuming.
Changing the time setting
This may be necessary when vacuuming floor surfaces of 40 m2.
1.Press twice until “Select timer?” is shown, confirm by pressing .
2.Set the desired time setting by pressing and then confirm with .
(When “On” is chosen, use to set desired time, confirm by pressing . This is the vacuuming time after wall mapping.)
3.Press to commence vacuuming.
Never start vacuuming at distances under 0.5 m from a magnetic strip, staircase or level difference. Vacuuming can always
be interrupted by pressing . After this, pressing recommences vacuuming, while pressing will call up the menu.
Quick vacuuming
The Quick program is identical with Normal vacuuming except that edge cleaning is not included.Vacuuming takes shorter time with the duration preset to 10 minutes, however, the vacuum result may be slightly inferior.
1.After you have switched on Trilobite, press until “Select program?” is shown. Confirm by pressing .
2.Use until “Quick” is displayed and confirm by pressing .
3.If you don’t want to change the time setting, press twice and start vacuuming by pressing . If you would like to change the time setting, please follow the next steps instead of step 3.
4.Confirm the option “Select timer?” by pressing .
5.Set the desired time setting by pressing and then confirm with .
(When “On” is chosen, use to set desired time, confirm by pressing .)
6.Press to commence vacuuming.
Never start vacuuming at distances under 0.5 m from a magnetic strip, staircase or level difference. Vacuuming can always
be interrupted by pressing . After this, pressing recommences vacuuming, while pressing will call up the menu.
Spot vacuuming
Use Spot vacuuming to quickly vacuum
a limited area, like if you have spilled some- thing.The area that is vacuumed is approx.
1.After you have switched on Trilobite, press until “Select program?” is shown. Confirm by pressing .
2.Use until “Spot” is displayed and confirm by pressing .
3.Put Trilobite in the centre of the area to be vacuumed and start vacuuming by pressing .
Do not under any circumstances vacuum liquids or lit or glowing objects, e.g. cigarette butts.
Never start vacuuming at distances under 0.5 m from a magnetic strip, staircase or level difference. Vacuuming can always
be interrupted by pressing . After this, pressing recommences vacuuming, while pressing will call up the menu.
English 11