Timer, Language, Status Messages, Set clock

Timer and Changing	Programmable
the Message Display Language	Timer

Normal. Timer: Auto	Normal. Timer: Auto
Select timer?	Select start time?

Timer

It is possible to set the time duration for Normal or Quick vacuuming.

1.Select the desired vacuum program, or press twice til “Select timer?” is shown. Confirm by pressing .

2.Set the desired time setting by pressing and then confirm by pressing . When

“Auto” is chosen Trilobite will calculate its own vacuuming time. When “On” is chosen, use to set desired time, confirm by pressing .

When “Off” is chosen Trilobite will clean until charging is needed. For normal vacuuming program, this is the vacuuming time after edge cleaning.

3. Press to commence vacuuming.

Language

Trilobite is able to present the information on the display in a number of different languages.

1.To change the display language, switch on Trilobite and press .

2.Press until the displays asks whether you want to change the language. Press .

3.Press to select the desired language and confirm by pressing .

Trilobite will now show display messages in the selected language.

Status Messages

When you select a function, a status message is shown on the display for about seven seconds. After this, the name of the function is shown again. It is of course possible to change or confirm a displayed function even while the status message is shown.

Trilobite can be programmed to clean at a particular time on every day of the week.

To use this function, you must first activate and program Trilobite’s day and time func- tions.You can then set which day or days you want Trilobite to clean on. After programming, it is a simple matter to activate or deactivate the setting.

NOTE:Trilobite can only start programmed cleaning if it is placed in the charging station.