Product description

	Filter lid	Roller
	Filter lid	Roller
	lock button
	lock button	Drive wheel
		Drive wheel

Terminals for

Rating plate

Roller cover

connection to

lock button

charger

Battery charger

Dust

collector

Display

Flexible bumper

Connection

Handle

Self-adhesive magnet strip

terminals

for permanent installation

Trilobite

Trilobite navigates using ultrasound and uses infrared light to detect level differences. During edge cleaning, it receives information about the size of the room. Edge cleaning serves as the basis for the estimated duration for independent vacuuming in the Normal vacuuming mode.

NOTE! Trilobite is not fully charged upon delivery. Before using it the first time, connect it to the battery charger. (Refer to page 8.)

A full battery charge requires approximately two hours.

Battery charger

When Trilobite has completed Normal or Quick vacuuming and it has indicated the charger (flash in display. Refer to page 10), it returns to the charger.The batteries are then charged and it is ready for more work.

Magnetic strip

The magnetic strip serve as “virtual walls” and are important for correct operation. Use it to block e.g. door and wall openings and level differences lower than 10 centimetres. (Refer to page 9.)

Use a pair of scissors or a knife to trim the magnetic strip to the correct length. See page 9 in the user instructions to see how the magnetic strip should be fitted.

Display and function keys

The function keys are used to start/stop Trilobite and for performing any necessary setup and programming.The display clearly shows which function is selected.

Handle

The handle, with its ergonomic grip, is used to lift and carry Trilobite easily.

Roller

The motor-driven rotating roller contributes to excellent dust pickup.

Dust collector

The dust collector, with its efficient microfilter, has a high capacity and is very simple to lift out for emptying. (See also page 5.)

4 English