Before YOU Start Check the Voltage | Electrolux Z2950 Series

BEFORE YOU START

CHECK THE VOLTAGE

Before connecting the cleaner to an electrical supply, ensure that the voltage shown on the rating plate located beneath the cleaner is of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.

CONNECTING TO YOUR ELECTRICITY SUPPLY

Permanently connected to the cleaner is a mains supply (2-core) cable fitted with a non-rewirable plug incorporating a 13A fuse.

In the event of the fuse requiring replacement the fuse cover should be removed using a small screwdriver. The old fuse MUST be replaced by a 13A ASTA approved BS1362 fuse or a BSI approved fuse. The cover must be replaced before the plug is used again. In the event of loss of the fuse cover, replacements can be obtained from your Electrolux Retailers and must be of the same colour as indicated by the coloured insert on the base of the plug.

If difficulty is experienced in obtaining a replacement, contact Electrolux Customer Services on 08706 055055.

In no circumstances must the plug be used without a correct fuse cover fitted.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted. Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 amp socket in another part of your home.

The wires in the mains cable of this appliance are coloured in accordance with the following code: Blue: Neutral. Brown: Live.

As the colours of the wires in the mains cable of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

If using a three-pin plug, do not make any connection to the terminal marked with the letter E or by the earth symbol or coloured green or green-and- yellow. This cleaner is double insulated and no earth connection is necessary.

It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, consult a qualified electrician, as Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the terms of the guarantee.

	Fuse	13 Amp Fuse
	Fuse	E
	Cover	E

N L

FuseBlue

Brown

Cord

Clamp

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product

Z2950 Series specifications

The Electrolux Z2950 Series vacuum cleaner is designed to provide powerful cleaning while maintaining user-friendliness and versatility. This series is equipped with a range of advanced features and technologies that enhance its performance and make it suitable for various cleaning tasks around the home.

One of the key features of the Z2950 Series is its high-efficiency motor, which delivers strong suction power. This ensures that dirt, dust, and debris are effectively removed from carpets, hard floors, and upholstery. The vacuum also includes a multi-surface tool that can easily adapt to different types of flooring, allowing users to clean seamlessly from room to room without needing to switch vacuum cleaners.

The Z2950 Series is designed with a lightweight and ergonomic design, making it easy to maneuver and carry. This aspect is particularly beneficial for users who may have difficulty handling heavier appliances. The vacuum incorporates a comfortable grip handle, which further enhances user experience during extended cleaning sessions.

Another notable feature of this series is the advanced filtration system. The Z2950 Series is equipped with a HEPA filter, which captures allergens and fine dust particles, contributing to improved indoor air quality. This is especially advantageous for allergy sufferers, as the vacuum significantly reduces the presence of irritants in the home environment.

The bagless design of the Z2950 Series is yet another advantage. It comes with a transparent dust container that allows users to see when it needs emptying. The easy-empty mechanism ensures a mess-free disposal process, making maintenance a breeze.

In addition to its functional attributes, the Electrolux Z2950 Series is designed with user convenience in mind. The vacuum features a retractable cord, which simplifies storage and minimizes clutter. The series also includes onboard tool storage, allowing easy access to attachments such as crevice tools and dusting brushes.

Overall, the Electrolux Z2950 Series stands out for its powerful suction, lightweight design, advanced filtration, and user-friendly features. It is an excellent choice for those seeking a reliable and efficient vacuum cleaner that can tackle various cleaning challenges while maintaining a strong focus on user convenience and comfort.