Left side view, Top view | Makita 9558HN, 9557HN, 9556HN specs

P 8/ 8

Wiring diagram

[2]Wiring of Field Lead Wires in the Rear of Motor Housing (cont.)

[2]-3. Left Side

Fig. 15

Left side view

*Some countries do not use noise suppressor.

Earth terminal on the lead wire (clear) of Noise suppressor* has to be connected to this portion.

Noise suppressor*

Fig. 16

Earth terminal on the lead wire (clear) of Noise suppressor* has to be connected to this portion.

*Some countries do not use noise suppressor. **Some countries do not use sensormatic tag.

Noise suppressor*

Sensor-matic tag (anti-theft tag)

Image 8

Contents

Standard equipment SpecificationOptional accessories Disassembling RepairArmature and Spiral Bevel Gear Switch lever Spindle Repair Armature and Small Spiral Bevel GearSpiral Bevel Gear 37 and Ball Bearing 6201DDW Assembling How to fit Retaining ring S-12 in place See Fig Repair Spiral Bevel Gear 37 and Ball Bearing 6201DDWDisassembling/Assembling Shaft Lock Mechanism Tightening Tapping Screws That Fasten the Field Circuit diagram When Spacer is used When Spacer is not used Make sure that Field lead wires Are tight in Motor housingRight side view Bottom view Make sure that Field lead wires are tight in Motor housing TopLeft side view Top view