Bissell 9200, 9400 warranty After Cleaning, Machine Storage, Nozzle is clear

Page 11

Carpet Cleaning (Continued)

7

7.Remove the tank from the base of the machine by lifting up on the tank carry handle. Carry like a

bucket to a utility sink or outside where you will dispose of the dirty water.

7a. Unlatch the top of the tank from the bottom by lifting up

 

on the tank latch which is located on the back of the tank.

 

7b. Remove the top of the tank by lifting up on the handle. 7b

Note how the lip on the top tank separates

 

from the groove in the bottom tank. This

 

placement is important when putting the

 

tank back together.

 

7c. Lift the bottom portion of the tank and pour out

 

dirty water toward the sink through the triangular

 

shaped opening in the corner of the tank.

 

Note: You may notice hair & debris deposits on

7d

the carpet or in the tank that were loosened

 

by the cleaning action (especially with newer

 

carpets that have never been deep cleaned

 

before). This debris should be picked up and

 

thrown away.

 

7d. Fill the heavy duty bladder with clean hand hot tap

 

water, following instructions 1c through 1e on page 9.

 

Note: Remember to secure the tank latch in

 

the back and test to make sure it is secure 7f

before picking up the tank. Always check

 

the level of cleaning formula in the formula

 

tank at the same time and refill as needed.

 

8. Rinse (Optional). Rinsing is an optional step that can

 

be done during the cleaning process by switching

 

from one of the clean settings on the Custom Clean

 

dial to a rinse setting, or it can be done after the

 

carpeted area has been cleaned. Simply choose the

8a

rinse setting on the Custom Clean dial, and follow

 

the same path as you did for cleaning, taking care

 

to do a forward (wet) stroke by depressing the spray

 

trigger, a backward (wet) stroke, and a forward and

 

backward (dry) stroke, releasing the spray trigger.

 

Continue this until the water you see coming up the

 

nozzle is clear.

 

After Cleaning

 

Machine Storage

7a

7c

7e

7g

or

Once your cleaning is complete, make sure the 2-in-1 water tank is emptied, rinsed out, and dried before the next use. The formula tank can remain filled and ready to go, or it can simply be emptied back into the formula bottle if that is more convenient.

Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty.

w w w . b i s s e l l . c o m

WARNING:

To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.

11

ug310-5880_9200E_406.indd 11

6/9/06 4:25:40 PM

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Safety Instructions Thanks for buying a Bissell ProHeat Use indoors only Do not immerse Important Safety InstructionsSpraying Crevice Tool Optional AccessoriesIndicator Light Upholstery Tool Stair Tool TurboBrushBissell Formulas Assembling Your ProHeat How to Use this GuideBuilt-in Heater Special Features of Your Bissell ProHeatDual DirtLifter PowerBrushes Custom CleanReady Tools Dial Easy to Remove and Clean NozzleIn-1 Water Tank Carpet Cleaning Before You CleanSet Ready Tools dial to the floor cleaning setting Heater SwitchNozzle is clear After CleaningMachine Storage Let all parts dry completely before storing Machine CareAfter carpet is dry, vacuum again to remove hair and fuzz Silk vinyl, leather, or 100% cotton upholstery Bladder with clean hand hot tap waterSet Ready Tools dial to the hose/attachment setting Turn the Custom Clean dial to the rinse/protect settingCleaning with Attachments Stain Removal Cleaning Formula SectionAllow adequate time for floors to dry Hard Floor CleaningTurn the machine on its side Small Belt Removal and Replacement InstructionsTo reduce the risk of fire Electric shock or injuryRemove brush rolls by pulling them off of the metal rods Brush Removal and Large Belt Replacement InstructionsReduced spray or no spray TroubleshootingDirtLifter PowerBrushes do not turn Built-in heater ready light does not illuminateIn-1 water tank may not be seated properly Cleaner not picking up solutionFor New Zealand inquiries For all other inquiries Bissell Consumer ServicesBissell Homecare Overseas Inc For Australian inquiriesPet Odor and Soil Removal Formula with Replacement Parts Bissell ProHeatPart Name Autoload Gasket fits both Water and Formula TankUg310-58809200E406.indd 06 42548 PM Warranty Bissell ProHeat Limited Two Year Warranty
Related manuals
Manual 24 pages 56.16 Kb

9400, 9200 specifications

The Bissell 9200 and 9400 series are prominent models in the realm of carpet cleaning and home maintenance, designed to ease the burden of keeping your living space clean and fresh. These machines exemplify an innovative combination of advanced technology, essential features, and user-oriented characteristics that cater to a variety of cleaning needs.

The Bissell 9200, commonly known as the ProHeat 2X, boasts a robust design with unique characteristics aimed at deep cleaning carpets. One of its standout features is the built-in heater that helps maintain hot water temperatures during the cleaning process, enhancing the effectiveness of the cleaning solution. This ensures that dirt, stains, and allergens are effectively lifted from the fibers of your carpet, providing a deeper clean compared to standard methods.

Equipped with two large capacity water tanks, the Bissell 9200 facilitates longer cleaning sessions without the need for frequent refills. The separate tanks for clean and dirty water ensure that you are continually applying fresh cleaning solution while efficiently disposing of dirt. Additionally, the multi-surface cleaning capability allows for versatility, enabling users to clean carpets, upholstery, and stair surfaces with ease.

Transitioning to the Bissell 9400, or the ProHeat 2X Revolution, customers will find enhanced features and performance efficiency. It features a lightweight design, making it easier to maneuver around the house. The 9400 model also comes equipped with the "CleanShot" technology, which provides users the ability to pre-treat tough stains directly from the machine, delivering targeted cleaning power without additional mess.

One of the key highlights of the 9400 is its express clean mode that allows carpets to dry in approximately 30 minutes, a significant improvement over traditional steam cleaning methods. This quick-drying feature not only promotes convenience but also reduces the time required for carpets to be put back into use, making it ideal for busy households.

Both models feature a “Triple Action Brush Roll” that works during cleaning to loosen, lift, and remove embedded dirt in carpet fibers. Moreover, they come equipped with specialized attachments like the pet tool and upholstery tool, catering specifically to pet owners and those looking for additional cleaning versatility.

In summary, the Bissell 9200 and 9400 models are designed with practicality and efficiency in mind. They combine powerful cleaning capabilities, rapid drying features, and specialized tools to meet the diverse cleaning demands of any home, making them valuable additions to your cleaning arsenal.
Top Page Image Contents