Cleaning with Attachments

Your ProHeat 2X machine comes equipped with a flex hose and at least one cleaning tool for cleaning stairs, upholstery, and more.

1. Important! If using to clean upholstery, check upholstery tags. A. Check manufacturer’s tag before cleaning. “W” or

“WS” on the tag means you can use your ProHeat 2X. If the tag is coded with an “X” or an “S” (with a diagonal stripe through it), or says “Dry Clean Only”, do not proceed with any deep cleaning machine. Do not use on Velvet or Silk. If manufacturer’s tag is missing or not coded, check with your furniture dealer.

B. Check for colourfastness in an inconspicuous place. C. If possible, check upholstery stuffing. Coloured

stuffing may bleed through fabric when wet. D. Plan activities to allow upholstery time to dry. E. Vacuum thoroughly to pick up loose debris and pet

hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds.

2. Follow the instructions on pages 9 & 10 for filling the 2-in-1 water tank and the formula tank.

3. Set Ready Tools dial to the hose attachments setting. This will allow spray and suction from the flex hose.

4. Set Custom Clean dial for heavy traffic, normal clean, light clean, or rinse, as desired

5. Attach the cleaning tool to the end of the hose.

6. Plug in and turn on the power switch.

Note: The built-in heater heats the cleaning formula for carpet and hard floor application only. It does not heat the cleaning formula through the accessory tools.

7. Clean by pressing the spray trigger to spray formula onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the spray trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Rinse (optional) and suction as needed.

Caution: Do no overwet.

8. Remove and rinse tools in clean, running water. Dry and replace in the tool caddy.

9. It is recommended that you suction clean water from the tap to rinse out the flex hose.

10. Before replacing, lift end of flex hose and stretch out to ensure all water is cleared from flex hose.

11. Coil flex hose around the tool caddy.

12. Empty 2-in-1 water tank and rinse out, following the instructions on page 11.

13. Return Ready Tools dial to floor setting.

14 w w w . b i s s e l l . c o m

Manufacturer’s tag

WARNING:

To reduce the risk of injury, be extra careful when cleaning stairs. Make sure machine is secure and level.

ug310-5880_9200E_406.indd 14

6/9/06 4:25:42 PM

9400, 9200 specifications

The Bissell 9200 and 9400 series are prominent models in the realm of carpet cleaning and home maintenance, designed to ease the burden of keeping your living space clean and fresh. These machines exemplify an innovative combination of advanced technology, essential features, and user-oriented characteristics that cater to a variety of cleaning needs.

The Bissell 9200, commonly known as the ProHeat 2X, boasts a robust design with unique characteristics aimed at deep cleaning carpets. One of its standout features is the built-in heater that helps maintain hot water temperatures during the cleaning process, enhancing the effectiveness of the cleaning solution. This ensures that dirt, stains, and allergens are effectively lifted from the fibers of your carpet, providing a deeper clean compared to standard methods.

Equipped with two large capacity water tanks, the Bissell 9200 facilitates longer cleaning sessions without the need for frequent refills. The separate tanks for clean and dirty water ensure that you are continually applying fresh cleaning solution while efficiently disposing of dirt. Additionally, the multi-surface cleaning capability allows for versatility, enabling users to clean carpets, upholstery, and stair surfaces with ease.

Transitioning to the Bissell 9400, or the ProHeat 2X Revolution, customers will find enhanced features and performance efficiency. It features a lightweight design, making it easier to maneuver around the house. The 9400 model also comes equipped with the "CleanShot" technology, which provides users the ability to pre-treat tough stains directly from the machine, delivering targeted cleaning power without additional mess.

One of the key highlights of the 9400 is its express clean mode that allows carpets to dry in approximately 30 minutes, a significant improvement over traditional steam cleaning methods. This quick-drying feature not only promotes convenience but also reduces the time required for carpets to be put back into use, making it ideal for busy households.

Both models feature a “Triple Action Brush Roll” that works during cleaning to loosen, lift, and remove embedded dirt in carpet fibers. Moreover, they come equipped with specialized attachments like the pet tool and upholstery tool, catering specifically to pet owners and those looking for additional cleaning versatility.

In summary, the Bissell 9200 and 9400 models are designed with practicality and efficiency in mind. They combine powerful cleaning capabilities, rapid drying features, and specialized tools to meet the diverse cleaning demands of any home, making them valuable additions to your cleaning arsenal.