Brush Removal and Large Belt Replacement Instructions
Brushes can be removed for cleaning or replacement as needed.
1.Follow Small Belt Removal Instructions on page 17.
2.Remove brush rolls by pulling them off of the metal rods.
3.Place cleaned or new brush rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the rod. Be sure to let the rod slide through the bushing to insure proper fit.
4.
5.Place small belt over back roller and metal cog.
6.Place pivot arm in place and screw in place using the silver screw.
7.
8.Return nozzle to front of unit, by latching from underneath and then securing with a screw.
If you have any questions or are having trouble installing or replacing your belt(s) or brushes, please call BISSELL Consumer Services in the UK at 0870.225.0109, in Australia at 1.800.811.183 or in New Zealand at 0800.247.735.
For all other countries call our U.S. A. Headquarters at 616.453.4451 or visit the BISSELL Website: www.bissell.com
WARNING:
To reduce the risk of fire, electric shock or injury, unplug from the outlet before servicing.
23
4 | 5 |
67
8
18 w w w . b i s s e l l . c o m
6/9/06 4:25:46 PM