How to Use this Guide
This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat 2X. You’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this User's Guide thoroughly before assembling your Deep Cleaner.
Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL ProHeat 2X for many years.
WARNING:
Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
1
Assembling Your ProHeat 2X
Your ProHeat 2X comes in three, easy to assemble components: Upper Handle
Lower Handle Tool Caddy
The only thing you will need to assemble your cleaner is
2
a Phillips head screwdriver.
3
4
Refer to Assembly Diagram on page 5
1.Slide upper handle onto lower handle.
2.Screw 3 screws into the marked holes.
3. Place upper hose rack onto back of upper handle and secure with tapered screw.
4.Place lower hose rack onto back of upper
| handle by pushing in and sliding down until it | 5 | |
| snaps into place. |
|
|
5. | Snap tools into the tool caddy as shown in |
| Crevice Tool |
| figure 5. |
| Holder |
6. | Wrap power cord and flex hose as shown in |
| |
| (select | ||
| figure 6. |
| |
|
| models) | |
7. | Keep flex hose snugly in place by using |
| |
|
| ||
| the hose secure latch. | Scotchgard | |
| ProHeat 2X assembly is now complete. | ||
|
| Protector |
Applicator Tool
(select models)
Tough Stain Brush
TurboBrush
(select models)
Spraying Crevice Tool
(select models)
6
Hose Secure
Latch
6 w w w . b i s s e l l . c o m
6/9/06 4:25:36 PM