Hard Floor Cleaning
Your ProHeat 2X model may come with a hard floor tool and Hard Floor Solutions Formula. If not, these products are available for purchase by contacting the BISSELL Consumer Services department by phone. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors.
Caution: Do not use on unsealed hardwood floors.
1.Vacuum or sweep thoroughly to pick up any loose debris and pet hair.
2.Move any furniture, if needed.
3.Empty any carpet cleaning formula back into the BISSELL bottle if stored in the formula tank.
Fill formula tank with BISSELL Hard Floor Solution Formula.
4.Fill the
5.Attach the hard floor tool onto the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place.
6.Check Ready Tools dial. It should be set on floor cleaning.
7.Set the Custom Clean dial to normal clean.
8.Plug in and turn on the power switch and heater switch.
9.Slowly move the machine forward and back over bare floor surface one time while depressing spray trigger.
Caution: Do not overwet.
10.Repeat the motion without pressing the spray trigger using the hard floor tool to squeegee and suction up the dirty water.
11.Allow adequate time for floors to dry.
12.Remove hard floor tool, rinse and dry before storing.
13.If any formula remains in the formula tank, pour it back into the Hard Floor Solutions bottle for use the next time.
14.Rinse out the formula tank.
16 w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of fire, electric shock or injury unplug from outlet before servicing.
5
6/9/06 4:25:45 PM