Turn the machine onto its side so the belt access area is
4. facing upward (see illustrations).
On the bottom of the machine, near the belt access area,
5. is a White Retainer Plate that holds the black Brush Arm and brush in place. Using a Phillips head screwdriver remove the screw that holds the White Retainer Plate in place. Set White Retainer Plate and Phillips head screw aside (see illustrations).
Remove the black Brush Arm that holds the brush in
6. place. Set the black Brush Arm aside (see illustrations).
7. Locate and remove the broken Pump Belt.
To Replace Broken Pump Belt
With the unit still on its side, loop one end of the
1. replacement Pump Belt around the Red Pump Pulley and the other end around the silver motor shaft (see illustration). Do not twist the replacement Pump Belt.
2. Re-install the Brush into the base of the unit.
Place the black Brush Arm onto the Brush and slide
3. black Brush Arm into original position (see illustrations). Reattach White Retainer Plate and secure with screw.
To Remove Broken Pump Belt Continued
Remove the Belt Access Door. Insert a flathead
3. screwdriver into the slot nearest the handle to gently pry off the door (see illustration).
3 
4
White Retainer Plate
5 
6
7
12
3
8