Network Operator’s Guide — Accessing TopAccess End-User Mode 13
Accessing TopAccess End-User ModeTo operate TopAccess, this equipment should be connected to the network and be configured
with the TCP/IP settings. After you complete the TCP/IP setup, you can access to TopAccess
web site to operate various functions from your computer using a web browser such as Netscape
Navigator and Internet Explorer.
You can use the TopAccess web-based utility from a Windows, Macintosh or Unix operating
system environment. The following browsers are supported:
Windows
•Internet Explorer 5.5 or later
•Netscape Navigator 7.02 or later
Macintosh
•Internet Explorer 5.5 or later
•Netscape Navigator 7.02 or later
Unix
•Netscape Navigator 7.02 or later
Accessing TopAccess in end-user mode
1. To navigate to TopAccess, enter the following URL on the
address box of your Internet browser.
http://<IP Address> or http://<Device Name>
For example
When the IP address of the equipment is “10.10.70.105”:
http://10.10.70.105
When the device name of this equipment is “mfp-00c67861”:
http://mfp-00c67861
2. The TopAccess web page for end users opens.
SUPPLEMENT: •You can also access TopAccess using the TopAccessDocMon link. For instructions
on accessing TopAccess from TopAccessDocMon, see the Printing Guide.