Operation
Upholstery cleaning
Your Big Green Complete comes with special tools for vacuuming and wet cleaning upholstery, stairs and more.
1.Important! If using to wet clean upholstery, check the upholstery tags before proceeding.
a.Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your Big Green Complete. If the tag is coded with an “X” or an “S” (with a diagonal stripe through it), or says “Dry Clean Only”, do not proceed with deep cleaning. Do not use on velvet or silk. If manufacturer’s tag is missing or not coded, check with the furniture maker or the furniture dealer.
b.Check for colorfastness in an inconspicuous place.
c.If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet.
d.Plan activities to allow upholstery time to dry.
e.Vacuum thoroughly.
2.Refer to the “Getting Ready to Wet Clean” on page 10.
3.Attach the desired wet cleaning tool to the wand or grip.
4.Clean by pressing the spray trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the spray trigger to suction soiled water. Continue to clean the area, working in small sections, until no more dirt can be removed. Suction as needed to remove as much water as possible.
Caution: Do not overwet.
5.Remove and rinse tools in clean, running water. Dry and put away.
6.See "When you are finished" instructions on page 12.
w w w . b i s s e l l . c o m
Manufacturer’s tag
Tip:
It is recommended that you suction clean water from the tap to rinse out the hose.
8 0 0 . 2 3 7 . 7 6 9 1 | 136 |
10/30/07 3:40:13 PM |