How to use this guide
This user’s guide has been designed to help you get the utmost satisfaction from your BISSELL Big Green Complete. You’ll find assembly and operating instructions, safety precautions,
as well as maintenance and troubleshooting instructions. Please read this user's guide thoroughly before assembling your product.
Pay particular attention to the product diagram, assembly instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this user’s guide will greatly enhance your ability to get the most performance from your BISSELL Big Green Complete for many years.
WARNING:
Do not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures.
Assembly
Your Big Green Complete is easy to assemble and | 1 | 2 | |
requires no tools: |
|
| |
1. | Attach hose to Quick Release™ Hose Door |
|
|
| by inserting fitted end and turning clockwise |
|
|
| until you hear it click into the locked position. |
|
|
2. | Attach hose solution line to unit by inserting |
|
|
| fitted end into the machine. Turn clockwise |
|
|
| until it snaps into place. | 3 | 4 |
|
| ||
3. | Snap the two wand pieces together by |
|
|
| lining up tabs with holes and clicking |
|
|
| together. Be sure that the wand piece with |
|
|
| the adaptor (see figure 4a) is the one you will |
|
|
| attach to the tool to. Attach assembled wand |
|
|
| to grip using the same technique. |
|
|
4. | Snap the desired tool on the end of the wand. | 4a | 5 |
| Place wand adaptor into the wand caddy on | ||
| the side of the unit. |
|
|
5. | Place either tool caddy or solution tank (if |
|
|
| wet clean mode is desired) onto the back of |
|
|
| the machine. |
|
|
| Wand Adaptor |
| Wand Caddy |
16 w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |
10/30/07 3:38:58 PM |