Bissell 68Z3 warranty Assembly

Page 5

Assembly

1.Connect the hose to the vacuum by inserting the hose connector into the suction opening on the bottom front of the vacuum. Push in until it clicks into the locked position.

2.Connect the telescoping extension wand to the handle end of the hose.

3.Connect the floor nozzle foot onto the telescoping extension wand.

4.Attach the tool holder onto the top portion of the extension wand. Place the tools onto the tool holder for storage.

5.To extend the telescoping extension wand, push the black release button and then pull the bottom of the wand to the desired length.

6.Once assembled, you can store your vacuum by inserting the storage clip (located on the back of the floor nozzle) into the storage slot on the rear of the vacuum.

NOTE: Shorten the length of the telescoping extension wand for storage.

WARNING:

Plastic film can be dangerous. To avoid danger of suffocation, keep away from babies and children.

1.2.

3.4.

5

w w w . b i s s e l l . c o m

Image 5
Contents Users Guide Thanks for buying a Bissell Vacuum Reduce the risk of fire, electric shock, or injury Important Safety InstructionsProduct view Assembly Automatic cord rewind Power cordOperations Air flow regulator Power buttonVariable suction power control Up into the floor nozzle Special toolsEmptying the dirt container Maintenance and careCleaning the inner cyclone & screen Cleaning the pre-motor filter Cleaning the Post-motor Hepa media filter Thermal protector Maintaining the Wide TurboBrush PetVacuum cleaner won’t run TroubleshootingVacuum cleaner won’t pick up or low suction Thank you for selecting a Bissell product1011 Replacement partsPart Name Limited One Year Warranty Warranty Bissell CleanView Dual Cyclonic VacuumBissell consumer services If your Bissell product should require service