Bissell 68Z3 warranty Operations, Power cord, Automatic cord rewind

Page 6

Operations

Power cord

The power cord is located at the rear of the vacuum. Gently pull out the power cord, watching for the yellow line. Stop pulling the power cord once the yellow line is visible. There is also a red line, which indicates the end of the usable cord. Do not pull the power cord out beyond the red line.

Automatic Cord Rewind Button

Automatic cord rewind

Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, press the power button OFF ( ) and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the automatic cord rewind button to rewind the cord automatically.

CAUTION:

Be careful to avoid injury as cord retracts very quickly.

6w w w . b i s s e l l . c o m

Image 6
Contents Users Guide Thanks for buying a Bissell Vacuum Important Safety Instructions Reduce the risk of fire, electric shock, or injuryProduct view Assembly Power cord OperationsAutomatic cord rewind Power button Variable suction power controlAir flow regulator Special tools Up into the floor nozzleMaintenance and care Cleaning the inner cyclone & screenEmptying the dirt container Cleaning the pre-motor filter Cleaning the Post-motor Hepa media filter Maintaining the Wide TurboBrush Pet Thermal protectorVacuum cleaner won’t pick up or low suction TroubleshootingVacuum cleaner won’t run Thank you for selecting a Bissell productReplacement parts Part Name1011 Warranty Bissell CleanView Dual Cyclonic Vacuum Limited One Year WarrantyIf your Bissell product should require service Bissell consumer services