Maintenance and care
Maintaining the Wide TurboBrush Pet
(Select models only)
The Wide TurboBrush Pet should be checked regularly for clogs or debris wrapping around the brush.
1.Unplug the vacuum from electrical outlet.
2.If a clog is present or debris is visible, turn the collar on the neck of the Wide Pet TurboBrush counterclockwise to the unlocked position to remove the faceplate and clear any obstructions.
3.To clean debris from the brush, remove the brush from the drive belt and clean debris.
4.Reposition the drive belt on the brush. Place the ends of the brush in the slots on the sides. Reposition the faceplate and turn the collar clockwise to the locked position.
Thermal protector
An internal thremal protector has been designed into your vacuum to protect it from overheating. When the thermal protector activates, the vacuum motor will stop operating. If this happens:
1.Turn the vacuum OFF (O) and unplug from electrical outlet.
2.Empty dirt container, check filters and air passages for dirt accumulation.
3.The thermal protector automatically resets after approximately 1 hour. If the thermal protector does not reset, call BISSELL Consumer Services.
12w w w . b i s s e l l . c o m