Bissell 83V5 warranty Fill the 2-in-1 water tank, Fill the bladder with clean hand hot tap water

Page 10

Operations

Fill the 2-in-1 water tank

1.Remove the tank from the base of the machine by lifting the tank carry handle.

2.Carry like a bucket to the sink. Rotate the handle forward to unlatch the lid. Remove lid, turn over and locate built in measuring cup.

3.Fill with BISSELL 2X formula to the indicat- ed fill line on the built in measuring cup and pour into mouth of the bladder.

4.Fill the bladder with clean hand hot tap water.

*Do not boil or microwave water as it can destroy the bladder.

5.Replace the top of the tank by matching the lid and tank edges. Handle must be in the forward position in order to replace lid. Rotate the handle to the carrying position to latch the lid.

Note: Remember to secure the lid and test to make sure it is secure before picking up the tank.

1.

3.

5.

2.

4.

6.

6.Place tank into machine base, seating firmly in place. Rotate tank handle back into latched position.

WARNING:

To reduce the risk of fire and electric shock due to internal component damage, use only BISSELL cleaning formulas intended for use with the deep cleaner. Non-BISSELL cleaning formulas may harm the machine and void the warranty.

10w w w . b i s s e l l . c o m

Image 10

Contents Users Guide 83V5 SeriesThanks for buying a Bissell Healthy Home Fresh Clean Reduce the risk of fire, electric shock, or injury Read all instructions before using your deep cleanerThis appliance must be Earthed Lower Body Assembly Optional AccessoriesErgonomically Designed Handle Handle Assembly Heater Switch Belt Access Door Removable Nozzle DirtLifter PowerBrushCord Clip Tough Stain Tool Ready-to-Use Hose Cleaning formulaPower Switch Large, Easy-To Maneuver Wheels Handle ReleaseAssembly Operations In-1 water tank Special features Scotchgard ProtectorMeasuring cup Removable NozzleBefore you clean Pretreating optionalFill the bladder with clean hand hot tap water Fill the 2-in-1 water tankCarpet cleaning Handle Release Power Switch Heater SwitchReadyTools Empty the 2-in-1 water tank/clean removable nozzleCheck for colourfastness in an inconspicu- ous place Operations Thoroughly vacuum or sweep floor to pick up any debris Hard Floor CleaningPlace.4 Be sure the ReadyTools dial is set to Machine care Maintenance and careMachine storage Heat indicator light does not illuminate TroubleshootingReduced spray or no spray Thank you for selecting a Bissell product DirtLifter PowerBrush does not turnCleaner not picking up solution Possible cause RemediesPart Name Replacement partsAccessories and formulas 203-0105 Lint ScreenFor UK inquiries For all other inquiries Warranty Bissell Healthy Home Fresh CleanLimited Two Year Warranty Bissell Homecare, IncBissell consumer services If your Bissell product should require service