Assembly
Your Healthy Home Fresh Clean comes in four easy to assemble components:
•Handle assembly
•Upper hose rack
•Lower body assembly
•Lower hose rack
Four Phillips head screws are included, 2 long and 2 short. They can be found taped to the handle assembly.
The only tool you will need to assemble your cleaner is a Phillips head screwdriver.
1.Slide handle assembly onto lower body and secure with two long screws.
2.Attach upper hose rack to back of handle assembly by pushing into open slots and sliding down until it snaps into place.
3.Attach lower hose rack by sliding in place on lower body assembly and securing with 2 short screws.
4.Attach Tough Stain tool to end of hose.
5.Wrap flex hose around hose rack and secure it into notched out holder as shown.
6.Keep flex hose locked in place with hose secure latch.
Warning:
Do not plug in your cleaner until you have completely assembled it per the instructions and are familiar with all instructions and operating procedures.
Tip: Deep cleaning carpeting regularly can reduce dust and allergens in your home.
1.
2.
3.
4.5.
6.
6 | Hose Secure Latch |
w w w . b i s s e l l . c o m |