Operations
Hard Floor Cleaning
Your Healthy Home Fresh Clean may have included a hard floor tool and 2X Hard Floor Solutions. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors.
Caution: Do not use on unsealed hardwood floors.
1.Thoroughly vacuum or sweep floor to pick up any debris.
NOTE: Prior to filling with formula and water be sure all carpet cleaning formula is thoroughly rinsed from the
2.Fill BISSELL Hard Floor Solutions to the indicated fill line in the built in measuring cup and pour into mouth of bladder.
3.Fill the bladder with clean hand hot tap water and set aside.
4.Attach the hard floor tool to the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into
place.4.
5.Be sure the ReadyTools dial is set to
FLOOR CLEANING.
6.Plug into an outlet and turn the power on.
7.Plan your cleaning route to leave an exit path. Be sure to allow adequate time for floors to dry.
8.While pressing the spray trigger, make one slow forward wet pass and another back.Caution: Do Not Overwet.
9.Repeat the motion without pressing the spray trigger using the hard floor tool to squeegee and suction up the dirty water.
10.When finished, remove hard floor tool, rinse and let dry before storing. Refer to the Maintenance and care section on page 15 for machine clean up and storage instructions.
14w w w . b i s s e l l . c o m